Husqvarna 365 X-Torq Owners Manual - Page 39
Saw chain filing and file gauges
View all Husqvarna 365 X-Torq manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
TECHNICAL DATA Recommended original and replacement bar and chain combinations These Husqvarna chain saw models are in the ANSI category of saws above 3,8 cu. in. and are not required to comply with low kickback performance requirements. However, for these models we recommend the following cutting equipment. Bar Length, inch Pitch, inch 15 3/8 16 3/8 18 3/8 20 3/8 24 3/8 28 3/8 Gauge, inch Max. nose radius 0,058 11T 0,058 11T 0,058 11T 0,058 11T 0,058 11T 0,058 11T Chain Type Husqvarna H42, Husqvarna H48 Husqvarna H42, Husqvarna H48 Husqvarna H42, Husqvarna H48 Husqvarna H42, Husqvarna H48 Husqvarna H42, Husqvarna H48 Husqvarna H42, Husqvarna H48 Drive link count 56 60 68 72 84 92 Note: For the chains above you are free to choose between 0,050" and 0,058" gauge drive link for the corresponding bar, see the table below. 0,050"/1,3 mm H46 H47 0,058"/1,5 mm H42 H48 WARNING! This chain saw is capable of severe kickback that could result in serious injury to the ! user. Do not operate this chain saw unless you have extraordinary cutting needs and experience and specialized training for dealing with kickback. Chain saws with significantly reduced kickback potential are available. Saw chain filing and file gauges English - 39