Husqvarna 536LiLX Operation Manual - Page 13
Assembly
View all Husqvarna 536LiLX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Fitting the loop handle ASSEMBLY Li-ion • Clip the loop handle onto the shaft. Note that the loop handle must be fitted between the arrows on the shaft. • Slide the spacer into the slot in the loop handle. • Fit the nut, knob and screw. Do not overtighten. • Now adjust the trimmer to give a comfortable working position. Tighten the bolt/knob. Assembling the guard Li-ion • Fit the correct trimmer guard (A) for use with the trimmer head. 2 1 A • Hang the trimmer guard on the hook on the plate holder (1). Bend the guard around the shaft and tighten it with the bolt (2) on the opposite side of the shaft. English - 13
ASSEMBLY
English
–
13
Fitting the loop handle
•
Clip the loop handle onto the shaft. Note that the loop
handle must be fitted between the arrows on the shaft.
•
Slide the spacer into the slot in the loop handle.
•
Fit the nut, knob and screw. Do not overtighten.
•
Now adjust the trimmer to give a comfortable working
position. Tighten the bolt/knob.
Assembling the guard
•
Fit the correct trimmer guard (A) for use with the
trimmer head.
•
Hang the trimmer guard on the hook on the plate
holder (1). Bend the guard around the shaft and
tighten it with the bolt (2) on the opposite side of the
shaft.
Li-ion
Li-ion
Li-ion
Li-ion
1
2
A