Husqvarna HU725AWD Owners Manual - Page 15
Service And Adjustments - replacement blade
View all Husqvarna HU725AWD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
SERVICE AND ADJUSTMENTS CAUTION: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: 1. Release control bar and stop engine. 2. Make sure the blade and all moving parts have completely stopped. 3. Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug. LAWN MOWER TO ADJUST CUTTING HEIGHT See "TO ADJUST CUTTING HEIGHT" in the Operation section of this manual. REAR DEFLECTOR The rear deflector, attached between the rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator's mowing position. If the deflector becomes damaged, it should be replaced. TO REMOVE DRIVE BELT (See Figs. 18 & 19) 1. Turn lawn mower on its side with air filter and carburetor up. 2. Remove blade bolt, lockwasher, hardened washer and blade. 3. Remove debris shield. 4. Remove rear baffle. 5. Disconnect return spring from rear baffle / rear gearcase belt keeper. 6. Disconnect cable from rear gearcase. 7. Remove drive cover. DRIVE COVER REAR BAFFLE DEBRIS SHIELD BLADE HARDENED WASHER LOCKWASHER BLADE BOLT FIG. 18 15