Husqvarna HU725AWDHQ Operation Manual - Page 15

Service And Adjustments

Get Husqvarna HU725AWDHQ PDF manuals and user guides View all Husqvarna HU725AWDHQ manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

SERVICE AND ADJUSTMENTS CAUTION: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: 1. Release control bar and stop engine. 2. Make sure the blade and all moving parts have completely stopped. 3. Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug. LAWN MOWER TO ADJUST CUTTING HEIGHT See "TO ADJUST CUTTING HEIGHT" in the Operation section of this manual. REAR DEFLECTOR The rear deflector, attached between the rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator's mowing position. Replace the deflector if damaged. TO REMOVE DRIVE BELT (See Figs. 20 & 21) NOTE: Before tipping lawn mower to remove drive belt, empty fuel tank by running engine until fuel tank is empty. 1. Turn lawn mower on its side with air filter and carbure- tor up. 2. Remove blade bolt, lockwasher, hardened washer and blade. 3. Remove debris shield. 4. Remove rear baffle. DRIVE COVER REAR BAFFLE DEBRIS SHIELD BLADE HARDENED WASHER LOCKWASHER BLADE BOLT FIG. 20 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
15
SERVICE AND ADJUSTMENTS
LAWN MOWER
TO ADJUST CUTTING HEIGHT
See “TO ADJUST CUTTING HEIGHT” in the Operation
section of this manual.
REAR DEFLECTOR
The rear deflector, attached between the rear wheels of your
mower, is provided to minimize the possibility that objects
will be thrown out of the rear of the mower into the opera-
tor's mowing position.
Replace the deflector if damaged.
CAUTION:
TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
1.
Release control bar and stop engine.
2.
Make sure the blade and all moving parts have completely stopped.
3.
Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug.
TO REMOVE DRIVE BELT (See Figs. 20 & 21)
NOTE
:
Before tipping lawn mower to remove drive
belt, empty fuel tank by running engine until fuel tank is
empty.
1.
Turn lawn mower on its side with air filter and carbure-
tor up.
2.
Remove blade bolt, lockwasher, hardened washer and
blade.
3. Remove debris shield.
4. Remove rear baffle.
DRIVE
COVER
BLADE BOLT
HARDENED WASHER
LOCKWASHER
BLADE
DEBRIS
SHIELD
REAR
BAFFLE
FIG. 20