Husqvarna PZ5430 Owners Manual

Husqvarna PZ5430 Manual

Get Husqvarna PZ5430 PDF manuals and user guides View all Husqvarna PZ5430 manuals
Add to My Manuals
Save this manual to your list of manuals

Husqvarna PZ5430 manual content summary:

  • Husqvarna PZ5430 | Owners Manual - Page 1
    (E10) is acceptable for use in this machine.The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Operator Manual PZ5426FX / 966614001 PZ5430 / 967004001 Please read the operator's manual carefully and make sure you understand the instructions before using the machine.
  • Husqvarna PZ5430 | Owners Manual - Page 2
    altered without prior notification. Note that no legal demands can be placed based on the information contained in these instructions. Use only original parts for repairs. The use of other parts voids the warranty. Do not modify or install non-standard equipment to the unit without consent from the
  • Husqvarna PZ5430 | Owners Manual - Page 3
    Good Service 6 Manufacturing Number 6 SYMBOLS AND DECALS 7 SAFETY 9 Safety Instructions 9 Belt 45 V-belts 45 Cutting Blades 46 Adjusting the Mower Deck 47 Leveling Deck 47 Anti-scalp Rollers 48 Procedures 53 TROUBLESHOOTING GUIDE 54 STORAGE 56 Winter Storage 56 Service 56 WIRING
  • Husqvarna PZ5430 | Owners Manual - Page 4
    result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower. Each person operating the mower must be of sound mind and body and must not be under the influence of
  • Husqvarna PZ5430 | Owners Manual - Page 5
    concerning operation, maintenance, and repairs must be carefully followed. Lawn mowers and all power equipment can be potentially dangerous if used improperly. Safety requires good judgment, careful use in accordance with these instructions and common sense. The machine must only be operated
  • Husqvarna PZ5430 | Owners Manual - Page 6
    by your retailer. See the certificate in the Service Journal in this operator's manual. When you need spare parts or support in service questions, warranty issues, etc., please consult the following professional: This manual belongs to the machine with the manufacturing number: Manufacturing
  • Husqvarna PZ5430 | Owners Manual - Page 7
    in this publication to notify the reader of a risk of personal injury or death, particularly if the reader should neglect to follow instructions given in the manual. RN Reverse Neutral Fast Used in this publication to notify the reader of a risk of material damage, particularly if the reader
  • Husqvarna PZ5430 | Owners Manual - Page 8
    SYMBOLS AND DECALS Read Operator's Manual Shut off engine and remove key before performing any maintenance or repair work Keep a safe distance from the machine Battery acid is corrosive, explosive and flammable Warning! Rotating blades, keep away from the discharge deck Do not touch parts 8
  • Husqvarna PZ5430 | Owners Manual - Page 9
    Operation • Read, understand, and follow all instructions on the machine and in the manual before starting. • It is recommended that someone rotating parts or under the machine. Keep clear of the discharge opening at all times. • Only allow responsible adults, who are familiar with the instructions,
  • Husqvarna PZ5430 | Owners Manual - Page 10
    this machine must first read and understand this Operation Manual. Local laws may regulate the age of the user. • Keep machine free of grass, leaves or other debris buildup which can touch the hot exhaust or engine parts and burn. • Do not allow the mower deck to plow leaves or other debris, causing
  • Husqvarna PZ5430 | Owners Manual - Page 11
    blades. • Never wear loose clothing that can get caught in moving parts. • Use ear protectors to avoid damage to hearing. Slope Operation Slopes mow on wet grass. Tires may lose traction. • Avoid starting, stopping, or turning on a slope. If the tires lose traction, disengage the blades and proceed
  • Husqvarna PZ5430 | Owners Manual - Page 12
    be a minimum of 16 years of age before operating a riding lawn mower. Keep children out of the mowing area and in the watchful care the watchful care of a responsible adult other than the operator. • Be alert and turn machine off if a child enters the area. • Before and while backing, look behind
  • Husqvarna PZ5430 | Owners Manual - Page 13
    use gasoline as a cleaning agent. • If leaks arise in fuel system, engine must not be started until problem has been resolved. • Check the fuel level before each use and leave space for the fuel to expand, driver's floor plate or any protective plate for the mower deck's drive belt is removed. 13
  • Husqvarna PZ5430 | Owners Manual - Page 14
    and replace with manufacturer's recommended parts, when necessary. • Mower blades are sharp. Wrap the blade or wear gloves, and use extra caution when servicing them. • Check brake operation frequently. Adjust and service as required. • Maintain or replace safety and instruction labels, as necessary
  • Husqvarna PZ5430 | Owners Manual - Page 15
    originally provided or recommended by the manufacturer. Only use approved repair parts for the machine. • The blades are sharp and can cause when handling them. • Check the parking brake functions regularly. Adjust and service as necessary. • Mulch blades should only be used in familiar areas when
  • Husqvarna PZ5430 | Owners Manual - Page 16
    . Never allow children or others in or on towed equipment. Make wide turns to avoid jack-knifing. Travel slowly and allow extra distance to stop. Do if proper medical treatment is not administered immediately. WARNING! This mower is equipped with an internal combustion engine and should not be
  • Husqvarna PZ5430 | Owners Manual - Page 17
    • Read machine's operator manual before each use. • mower smoothly - no jerky turns, starts or stops. • When mower is stopped, set brakes securely and use park brake. • If any part zero temperatures. WARNING! The rollover protection system's capabilities may be impaired by damage if the mower
  • Husqvarna PZ5430 | Owners Manual - Page 18
    CONTROLS This operator's manual describes the Husqvarna Zero Turn Rider. The rider is fitted with a Kohler or Kawasaki four-stroke overhead valve engine. Transmission from the engine is made via belt-driven Control Locations 4
  • Husqvarna PZ5430 | Owners Manual - Page 19
    moving forward, move the right control towards the neutral position. The rotation of the right wheel is reduced and the machine turns to the right. Zero turn can be achieved by moving one control backward (behind the neutral position) and carefully moving the other steering control forward from
  • Husqvarna PZ5430 | Owners Manual - Page 20
    must stand absolutely still when applying the parking brake. Always set the parking brake before dismounting. Release the parking brake before moving the mower. Parking brake Throttle Control The throttle control regulates the engine speed and the rate of rotation of the blades, assuming the blade
  • Husqvarna PZ5430 | Owners Manual - Page 21
    the control panel and is used to start and stop the engine. Turn the key clockwise to start the engine. Ignition switch Release the key to the RUN position when the engine has started. 8065-058 For using ACCESSORY, turn the key clockwise. Ignition switch - RUN position 8065-059 Ignition switch
  • Husqvarna PZ5430 | Owners Manual - Page 22
    . There are three fuses with ratings and functions: 1. 20 A, Primary fuse. 2. 7.5 A, Mower deck coupling. 3. 10 A, Accessories Choke control Fuses Hour Meter The hour meter displays the total automatically. The hour meter cannot be manually reset. Hour meter 22 8065-004 8065-043 8065-004
  • Husqvarna PZ5430 | Owners Manual - Page 23
    CONTROLS Tracking Knob If the mower is not tracking straight, check the air pressure in both by driving it at full throttle and the full forward position on both motion control levers. Gradually turn in the tracking bolt on the right hand side until the unit noticeably starts drifting right. 6.
  • Husqvarna PZ5430 | Owners Manual - Page 24
    Off Valve The fuel shut off valve is located at the left rear of the seat. The valve is off when the handle tab is turned perpendicular to the fuel line. 8065-009 Fuel shut off valve in the CLOSED position. 8065-010 24
  • Husqvarna PZ5430 | Owners Manual - Page 25
    the fuel system of an engine while in storage. To avoid engine problems, the fuel system should be emptied before storage of 30 days or carburetor are empty. Use fresh fuel the next season. See Storage Instructions for additional information. Never use engine or carburetor cleaners in the fuel
  • Husqvarna PZ5430 | Owners Manual - Page 26
    OPERATION Read the Safety Instructions section and the following pages if you are unfamiliar with the machine. Training Due to unique steering capabilities, zero turn mowers are far more maneuverable than typical riding mowers. This section should be reviewed in its entirety prior to attempting to
  • Husqvarna PZ5430 | Owners Manual - Page 27
    OPERATION Roll Bar and Safety Belt Operate the unit with the roll bar in the raised and locked position and use the seat belt. There is no rollover protection when the roll bar is down. If it is necessary to lower roll bar, do not wear the seat belt. Raise the roll bar as soon as clearance permits.
  • Husqvarna PZ5430 | Owners Manual - Page 28
    the both sides of the height panels. The following conditions must be fulfilled before the engine can be started: • The blade switch for engaging the mower blades must be depressed. • The parking brake must be on. • Both steering controls must be in the locked (outer) neutral position. Set deck to
  • Husqvarna PZ5430 | Owners Manual - Page 29
    OPERATION 5. Move the steering controls outward to the locked (outer) neutral position. 6. Move the throttle to the middle position. Place controls in neutral position 8065-018 Set the throttle 7. If the engine is cold, the choke control should be pulled up. 8065-019 Set the choke control
  • Husqvarna PZ5430 | Owners Manual - Page 30
    tank valve. OPERATION Fuel valve in the OPEN position 9. Press in and turn the ignition key to the start position. IMPORTANT INFORMATION Do not run the the choke control in gradually when the engine has started. Turn to the start position 8065-013 8050-780 Return to run position 8050-781 30
  • Husqvarna PZ5430 | Owners Manual - Page 31
    OPERATION 11. Set the engine speed with the throttle. Allow the engine to run at a moderate speed, approximately mid throttle, for 3-5 minutes before loading it too heavily. USE FULL THROTTLE WHEN MOWING (no choke). WARNING! Engine exhaust and certain vehicle components contain or emit chemicals
  • Husqvarna PZ5430 | Owners Manual - Page 32
    cable to the NEGATIVE (-) terminal of the fully charged battery. 3. Connect the other end of the BLACK cable to a good CHASSIS GROUND on the mower with the discharged battery, away from the fuel tank and battery. To remove cables, reverse order 4. Remove BLACK cable first from chassis and then from
  • Husqvarna PZ5430 | Owners Manual - Page 33
    parking brake by moving the lever downward. NOTE: The mower is equipped with an operator presence system. When the engine to selected setting. Release the parking brake WARNING! Make sure that no one is near mower when engaging blade switch. Make sure the work area is free from objects that could
  • Husqvarna PZ5430 | Owners Manual - Page 34
    Operating on Hills Read the Safety Instructions Driving on Slopes in the Safety Instructions. WARNING! Do not drive up Pull the control levers back to the center of the mower and press forward to regain forward motion. • Make all turns slowly. Place controls in neutral position 8065-018 Release
  • Husqvarna PZ5430 | Owners Manual - Page 35
    operating speed can be used without poor mowing results. • Avoid mowing wet lawns. The mowing result is poorer because the wheels sink into the soft lawn, clumps build, and the grass clippings fasten under the cowling. • Hose the mower deck underside with water after each use. When cleaning, the
  • Husqvarna PZ5430 | Owners Manual - Page 36
    deck and move throttle to minimum 4. Raise the mower deck by pressing the foot pedal forward to the transport position. 5. When the machine is standing still, activate the parking brake by pulling the lever upward. Raise deck to transport position 6. Turn the ignition key to the stop position. If
  • Husqvarna PZ5430 | Owners Manual - Page 37
    pump. Tilt the seat forward and remove the fan cover to gain access to the pump. Use a 5/8" wrench or socket and ratchet. Turn the pump release valve ½ turn. Reverse the procedure to reset the pump. Remove fan cover to access release valves 8065-061 WARNING! No adjustments or maintenance should
  • Husqvarna PZ5430 | Owners Manual - Page 38
    engine's cooling air intake Check the mower deck Check for loose hardware (screws, nuts) Clean under the mower deck Start the engine and blades, listen more often. 3) Performed by authorized service workshop. ● = Described in this manual ♦ = Not described in this manual ■ = Refer to the engine
  • Husqvarna PZ5430 | Owners Manual - Page 39
    engine manufacturer's manual WARNING! Before performing any service or adjustment checklist: • Engage the parking brake. • Place the Blade-switch in the disengaged position. • Turn the ignition switch to OFF position and remove the key. • Make sure the blades and all moving parts have completely
  • Husqvarna PZ5430 | Owners Manual - Page 40
    MAINTENANCE Battery The mower is equipped with a maintenance free battery and does not need servicing. However, periodic charging of the battery battery to "leak" power. 1. Lift the seat and rotate fully forward until supported by the seat rod. 2. Loosen the two wingnuts attached to the side "J"
  • Husqvarna PZ5430 | Owners Manual - Page 41
    . If the machine starts when one of these conditions is not met, turn the machine off and repair the safety system before using the machine again operator leaves the seated position. Check that the engine stops if the mower blades are engaged and the driver temporarily moves off the driver's seat.
  • Husqvarna PZ5430 | Owners Manual - Page 42
    when applying the parking brake. Parking brake Parking Brake Adjustments 1. Using a jack stand, raise the rear of the mower up off the ground. Make sure the machine is securely supported. 2. Remove the rear tire assemblies. 3. Release the park brake. 4. Measure the distance from the swivel to the
  • Husqvarna PZ5430 | Owners Manual - Page 43
    brake. Measure the distance between the D brake bolt and the brake swivel. The distance should be 1/8"-¼". 7. If adjustments are needed, loosen C jam nut. Turn the brake bolt until the distance is correct. Retighten C jam nuts. 1/8"-¼" gap with park brake engaged Measure gap 8065-052 8065-052 43
  • Husqvarna PZ5430 | Owners Manual - Page 44
    a ½" breaker bar, shift the idler arm counter clockwise. When there is enough slack, slip the belt onto the center spindle pulley. 3. Reinstall the belt guide removed in Step 5 above. 4. Double check belt routing to make sure it matches the routing decal, and that the belt does not have any twist
  • Husqvarna PZ5430 | Owners Manual - Page 45
    belt tension by turning the eyebolt to slip from wear. Replacing Pump Belt Park the mower on a level surface. Engage the parking brake. Belt Removal 1. Remove the deck belt (see Deck Belt Removal in this section of the manual). 2. Remove clutch stop to access the belt. 3. Disconnect clutch wire.
  • Husqvarna PZ5430 | Owners Manual - Page 46
    or cracked when hitting obstacles. Let the service workshop decide whether a blade with large when handling. 1. Remove blade bolt by turning counterclockwise. 2. Install new or re-sharpened Special blade bolt is heat treated. Replace with a Husqvarna bolt if required. Do not use lower grade hardware
  • Husqvarna PZ5430 | Owners Manual - Page 47
    deck. The deck should be adjusted slightly higher in the rear. NOTE: To insure accuracy of leveling procedure, mower deck drive belt must be installed prior to leveling the deck. 1. Wear heavy gloves. Turn each outer blade tip to align the deck in a side-to-side manner. 2. Measure from the floor
  • Husqvarna PZ5430 | Owners Manual - Page 48
    Do not adjust the rollers to support the deck. IMPORTANT INFORMATION Adjust anti-scalp rollers with the mower on a flat level surface. nut off ½ turn. NOTE: Tire should rotate freely but axle spacers should not. If wheels do not rotate freely take the unit to the dealer for service. Deck lift spring
  • Husqvarna PZ5430 | Owners Manual - Page 49
    or missing hardware. Cleaning Regular cleaning and washing, especially under the mower deck, will increase the machine's life-span. Make it a habit Do not spray water on the top of the mower deck. Use compressed air to clean the top side of mower deck. Regularly clean deck and underside of the deck
  • Husqvarna PZ5430 | Owners Manual - Page 50
    Lubrication Schedule LUBRICATION 8065-031 12/12 Every year 1/52 Every Week 1/365 Every day Lubricate with grease gun Oil change Filter change Level check * Change hydraulic drive filters. p Change engine oil every 50 hours. General Remove the ignition key to prevent unintentional movements
  • Husqvarna PZ5430 | Owners Manual - Page 51
    LUBRICATION Wheel and Deck Zerks Use only good quality bearing grease. Grease from well-known brand names (petrochemical companies, etc.) usually maintains a good quality. Front Wheel Mount Remove dust cap to expose zerk. Lubricate with a grease gun until the grease is forced out around the top
  • Husqvarna PZ5430 | Owners Manual - Page 52
    oil to the gasket of the new replacement filter. 4. Prefill the oil filter with new oil and install the new filter by hand. Turn ¾ to one full turn after the filter gasket contacts the filter base surface. 5. Fill reservoir with synthetic 15W 50 oil to the level of the lower hole in
  • Husqvarna PZ5430 | Owners Manual - Page 53
    LUBRICATION Transmission Purging Procedures Due to the effects air has on efficiency in hydrostatic drive applications, it is critical to purge the system. These purge procedures should be implemented any time a hydrostatic system has been opened to facilitate maintenance or any additional oil has
  • Husqvarna PZ5430 | Owners Manual - Page 54
    TROUBLESHOOTING Problem Engine will not start Starter does not turn the engine over Engine runs rough Engine seems weak Machine vibrates Cause • Blade switch is engaged. • Steering controls are not locked in the neutral position •
  • Husqvarna PZ5430 | Owners Manual - Page 55
    TROUBLESHOOTING Problem Cause Engine overheats • Clogged air intake or cooling fins • the transmission slack or has come off • Air trapped in hydraulic system Mower deck not engaging • Drive belt for the mower deck has come loose • Contact for the electromagnetic coupling has loosened •
  • Husqvarna PZ5430 | Owners Manual - Page 56
    mower deck to avoid corrosion. 2. Inspect the machine for worn or damaged parts the cylinder. Turn over the engine Service When ordering spare parts, please specify the purchase year, model, type, and serial number. Always use genuine Husqvarna spare parts. An annual check-up at an authorized service
  • Husqvarna PZ5430 | Owners Manual - Page 57
    WIRING DIAGRAM TIMER SCHEMATIC 57
  • Husqvarna PZ5430 | Owners Manual - Page 58
    Rear tires, turf pneumatic Tire pressures PZ 5426FX / 966614001 PZ5430 / 967004001 Kawasaki 1) Kohler 1) FX730V CV750 23.5 HP 4 ply 15 PSI / 103 kPa / 1 bar 1) See the Engine Manufacturer's manual for engine specifications. 2) The power rating of the engines indicated is the average net
  • Husqvarna PZ5430 | Owners Manual - Page 59
    /h / 19,425 m2/h 1260 lbs / 572 kg 82½" / 210 cm 47½" / 121 cm 52" / 132 cm 55½" / 141 cm 68" / 173 cm 72" / 183 cm PZ5430 / 967004001 54" (137.2 cm) 1"-5" (2.5-12.7 cm) 0 3 19" / 48.2 cm 4 adjustable Suspension Yes Yes 250 ft-lb Ogura 7 gauge 4.8 acres/h / 19,425 m2/h 1260 lbs / 572
  • Husqvarna PZ5430 | Owners Manual - Page 60
    TECHNICAL DATA Torque Specifications Engine crankshaft bolt Deck pulley bolts Lug nuts Blade bolt 50 ft/lb (67 Nm) 150 ft/lb (203 Nm) 75 ft/lb (100 Nm) 90 ft/lb (122 Nm) Standard ¼" fasteners Standard 5/16" fasteners Standard 3/8" fasteners Standard 7/16" fasteners Standard ½" fasteners 9 ft/lb
  • Husqvarna PZ5430 | Owners Manual - Page 61
    emission rules etc.). Do not remove any of these labels. Certificates can also be supplied with the machine at delivery or written in the Engine manual. Take care of them as they are valuable documents. 61
  • Husqvarna PZ5430 | Owners Manual - Page 62
    both wheels. Check the mower deck pitch and adjustment. Check: Safety switch for the parking brake. Safety switch for the mower deck. Safety switch in following the service schedule. The need and advantages of leaving the machine for service. The effects of service and maintaining a service journal
  • Husqvarna PZ5430 | Owners Manual - Page 63
    SERVICE JOURNAL Action After 10 hours Change the engine oil. Change the oil filter. Check hydraulic oil level. Inspect hydraulic hoses. Inspect hydraulic belt Inspect hydraulic
  • Husqvarna PZ5430 | Owners Manual - Page 64
    JOURNAL Action Daily Service Clean debris from mower. Check engine oil level. Check the tire pressures. Check underside of deck. Inspect deck pulleys. Check/clean the engine's cooling air intake. Check safety system.
  • Husqvarna PZ5430 | Owners Manual - Page 65
    JOURNAL Action 50-Hour Service Clean debris from mower. Check engine oil level. Check the tire pressures. Check underside of deck. Inspect deck pulleys. Check/clean the engine's cooling air intake. Check safety system.
  • Husqvarna PZ5430 | Owners Manual - Page 66
    JOURNAL Action 250-Hour Service Grease fittings (caster pivots and caster wheels) Inspect dampers Inspect frame Inspect throttle and choke cables Inspect hardware Check the tire pressures Change the engine
  • Husqvarna PZ5430 | Owners Manual - Page 67
    JOURNAL Action 500-Hour Service Grease fittings (caster pivots and caster wheels) Inspect dampers Inspect frame Inspect throttle and choke cables Inspect hardware Check the tire pressures Change the engine
  • Husqvarna PZ5430 | Owners Manual - Page 68
    SERVICE JOURNAL Action At Least Once Each Year Clean the engine's cooling air intake. Replace the air cleaner's pre-filter (foam). Replace the air filter's paper
  • Husqvarna PZ5430 | Owners Manual - Page 69
    Action SERVICE JOURNAL Date, mtr reading, stamp, sign 69
  • Husqvarna PZ5430 | Owners Manual - Page 70
    Action SERVICE JOURNAL Date, mtr reading, stamp, sign 70
  • Husqvarna PZ5430 | Owners Manual - Page 71
  • Husqvarna PZ5430 | Owners Manual - Page 72
    115 461527 Rev B www.husqvarna.com 2011-12-2
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
PZ5426FX / 966614001
PZ5430 / 967004001
Operator Manual
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.
Gasoline containing up to 10% ethanol (E10) is
acceptable for use in this machine.The use of any
gasoline exceeding 10% ethanol (E10) will void
the product warranty.