Husqvarna R 220T Operation Manual - Page 16

PRESENTATION Lifting lever for the cutting unit The lift lever is used to set the cutting unit in transport or mowing position. If the lever is pulled backwards the unit is raised and the blades automatically stop rotating (transport position). Counter: 322T AWD The chronometer shows how many hours the engine has been running. Any time when the engine is not running but the ignition is switched on is not registered. The last digit shows tenths of an hour (6 minutes). If the lock button is pressed in and the lever is moved forwards the unit will be lowered and the blades will automatically start to rotate (mowing position). Seat The seat has a jointed attachment on the front edge and can be tipped forward. The lever can also be used to temporarily regulate the cutting height, e.g. for a small mound in the lawn. Cutting height adjustment lever The cutting height can be adjusted to 10 different positions with the cutting height lever. 25-75 mm The seat can also be adjusted lengthways. To adjust move the lever under the front edge of the seat to the left, so that the seat can be moved forward or backwards to the required position. Lights: 322T AWD The lights are switched on and off using the power switch on the control panel. STOP START Fueling The engine runs on unleaded petrol with a minimum octane rating of 87 (not mixed with oil). We recommend the use of biodegradable alkylate petrol. (max. methanol 5%, max. ethanol 10%, max. MTBE 15%) Do not fill the tank completely, leave an expansion area of at least 2.5 cm (1"). 16 - English WARNING! Petrol is highly inflammable. ! Exercise care and refuel outdoors (see safety instructions). IMPORTANT! Do not use the fuel tank as a support area.