IBM 326m Installation Guide - Page 56
Other, codes
UPC - 000435835093
View all IBM 326m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Other beep codes Additional beep codes are listed in the following table. Table 2. POST beep code descriptions Beep code Description Action None Undetermined error. Call for service. 1 beep POST was completed successfully. One beep also occurs after POST if you type an incorrect password. None required. 2 beeps Undetermined error. Follow the instructions on the screen. Repeating beeps The system board might contain a failing component. v Make sure that the keyboard and pointing devices are connected correctly. v Make sure that nothing is resting on the keyboard. v Disconnect the pointing device; then, restart the server. If the problem goes away, replace the pointing device. If the problem remains, call for service. 1-1-2 Microprocessor register test has failed. Call for service. 1-1-3 Complementary metal oxide semiconductor (CMOS) write/read test has failed. 1-1-4 BIOS read-only memory (ROM) checksum has failed. 1-2-1 Programmable Interval Timer test has failed. 1-2-2 Direct memory access (DMA) initialization has failed. 1-2-3 DMA page register write/read test has failed. 1-2-4 1-3-1 1-3-2 Random-access memory (RAM) refresh verification has failed. First 64 Kb RAM test has failed. First 64 Kb RAM parity test has failed. Reseat the memory modules or install a memory module. If the problem remains, call for service. 42 eServer 326m Type 7969: Installation Guide