IBM 8654 Hardware Maintenance Manual

IBM 8654 - Eserver xSeries 330 Manual

Get IBM 8654 - Eserver xSeries 330 PDF manuals and user guides
UPC - 087944618102
View all IBM 8654 manuals
Add to My Manuals
Save this manual to your list of manuals

IBM 8654 manual content summary:

  • IBM 8654 | Hardware Maintenance Manual - Page 1
    Hardware Maintenance Manual xSeries 330 IBM
  • IBM 8654 | Hardware Maintenance Manual - Page 2
  • IBM 8654 | Hardware Maintenance Manual - Page 3
    Hardware Maintenance Manual xSeries 330 IBM
  • IBM 8654 | Hardware Maintenance Manual - Page 4
    Note: Before using this information and the product it supports, be sure to read the general information under " This publication was developed for products and services offered in the United States of America. IBM may not offer the products, services, or features discussed in this document in
  • IBM 8654 | Hardware Maintenance Manual - Page 5
    information for the IBM® xSeries 330. Important: This manual is intended for trained servicers who are familiar with IBM PC Server products. Important safety information Be sure to read all caution and danger statements in this book before performing any of the instructions. Leia todas as
  • IBM 8654 | Hardware Maintenance Manual - Page 6
    crites par les instructions. Lesen Sie alle Driver files. File download address is: http://www.us.pc.ibm.com/files.html IBM Online Addresses The HMM manuals online address is: http://www.us.pc.ibm.com/cdt/hmm.html The IBM PC Company Support Page is: http://www.us.pc.ibm.com/support/index.html The IBM
  • IBM 8654 | Hardware Maintenance Manual - Page 7
    the Ethernet controller 19 Network connection problems 19 Ethernet controller troubleshooting chart 19 Ethernet controller messages 20 Novell NetWare or IntraNetWare server ODI driver teaming messages 21 NDIS 4.0 (Windows NT) driver messages 22 Power checkout 24 Replacing the battery
  • IBM 8654 | Hardware Maintenance Manual - Page 8
    108 Safety inspection guide 109 Handling electrostatic discharge-sensitive devices 110 Grounding requirements 111 Safety notices (multi-lingual translations 111 Send us your comments 146 Problem determination tips 147 Notices 147 Trademarks 148 vi Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 9
    major components of the server: the system board, Ethernet controller, video controller, RAM, keyboard, mouse (pointing device), diskette drive, messages" on page 15. Also, if you cannot determine whether a problem is caused by the hardware or by the software, you can run Copyright IBM Corp. 2000 1
  • IBM 8654 | Hardware Maintenance Manual - Page 10
    " on page 15. • Check for the following responses: a. One beep. b. Readable instructions or the Main Menu. 3. DID YOU RECEIVE BOTH OF THE CORRECT RESPONSES? NO.Find successfully and you still suspect a problem, see "Undetermined problems" on page 98. 2 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 11
    performance, efficient memory management, flexibility, and reliable data storage. The xSeries 330 server comes with a three-year limited warranty and IBM Server Start Up Support. If you have access to the World Wide Web, you can obtain up-to-date information about your xSeries 330 model and
  • IBM 8654 | Hardware Maintenance Manual - Page 12
    technology and SIMD extensions • 256 KB Level-2 cache • Supports up to two microprocessors Memory: • Standard: 256 MB • (115-230 Vac) Video: • S3 Savage4 PRO Graphics/Video Accelerator (integrated on system board) • Compatible with SVGA • 8 MB SDRAM video memory Size • Height Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 13
    service processor. Refer to the documentation provided with the system-management software for more information. • Integrated network environment support Ethernet local area network (LAN). • IBM ServerGuide CDs The ServerGuide CDs that • Remote system problem-analysis support • Power and temperature
  • IBM 8654 | Hardware Maintenance Manual - Page 14
    light (amber) Diskette eject button CD activity light (green) CD eject button Hard disk drive activity light (green) Power-control button: Press this button to manually turn the server on or off. Power-on light: This green LED lights and stays on when you turn on your server and blinks when
  • IBM 8654 | Hardware Maintenance Manual - Page 15
    keyboard, monitor, and pointing device. Serial port: Signal cables for modems or other serial devices connect here to the 9-pin serial port connector. Cable Chaining Technology IN: This port is used to connect multiple servers together to share a single keyboard, monitor, and pointing device. USB
  • IBM 8654 | Hardware Maintenance Manual - Page 16
    the power source. 2 1 Turning off the server Turning off the server refers to the act of disconnecting the server from the power source. 8 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 17
    a wait state. When in a wait state, the server is not running the operating system, and all core logic is shut down, except for the service processor. Complete the following steps to put the server into stand-by mode: 1. Refer to your operating system documentation for the proper procedure to shut
  • IBM 8654 | Hardware Maintenance Manual - Page 18
    10 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 19
    troubleshooting information to help you resolve some common problems that might occur with the server. Diagnostic tools overview The following tools are available to help you identify and resolve hardware-related problems is used to quickly identify system errors. © Copyright IBM Corp. 2000 11
  • IBM 8654 | Hardware Maintenance Manual - Page 20
    set, you must type the password and press Enter, when prompted, before POST will continue. 2. A single problem might cause several error messages. When this occurs, work to correct the cause of the first error message. After "SCSI error codes" on page 95. 12 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 21
    items are correct, run the diagnostic programs to obtain additional information about the failing device. If the error remains or recurs, call for service. Identifying problems using status LEDs If the System Error light in the operator information panel on the front of the server is on, one or more
  • IBM 8654 | Hardware Maintenance Manual - Page 22
    inside a server with power on" on page 42 for instructions and precautions for working in the server with the power . See Table 3 for information on identifying problems using these LEDs. Light Path PS MEM TEMP 2, or one of the PCI service devices integrated on the system board. See
  • IBM 8654 | Hardware Maintenance Manual - Page 23
    more than one error message. Always follow the suggested action instructions for the first error message that appears. The following sections information. is the diagnostic message that indicates the reason for the problem. Text messages The diagnostic text message format is as follows: Function
  • IBM 8654 | Hardware Maintenance Manual - Page 24
    information that you can use to analyze the problem. Starting the diagnostic programs You can press the list that appears; then, follow the instructions on the screen. Notes: a. If the use, direct memory access (DMA) use, device drivers, and so on) by selecting Hardware Info from Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 25
    the Diagnostic Programs screen appears, select Utility from the top of the screen. 4. Select View Test Log from the list that appears; then, follow the instructions on the screen. The system maintains the test-log data while the server is powered on. When you turn off the power to the server
  • IBM 8654 | Hardware Maintenance Manual - Page 26
    Wide Web. Go to http: //www.pc.ibm.com/support/, select IBM Server Support, and make the selections for your server. • Contact your IBM service representative. To recover the BIOS: 1. Turn off from the menu that contains various flash (update) options. 18 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 27
    if the hub supports auto-negotiation. If not, try configuring the integrated Ethernet controller manually to match the driver README file). Ethernet controller troubleshooting chart You can use the following troubleshooting chart to find solutions to 10/100 Mbps Ethernet controller problems
  • IBM 8654 | Hardware Maintenance Manual - Page 28
    Table 4. Ethernet troubleshooting chart. Ethernet controller problem Suggested Action The server stops running The PCI BIOS interrupt settings are incorrect. when loading device drivers. Check the following: • Determine if the interrupt (IRQ) setting assigned to the Ethernet controller is
  • IBM 8654 | Hardware Maintenance Manual - Page 29
    in a team are of the same classification. Requested number of Secondary cards are not found. Explanation: The number of adapters specified in the bound. If the problem persists, contact your network supplier. Failed to create AFT group. Make sure that the drivers for supported adapters are loaded,
  • IBM 8654 | Hardware Maintenance Manual - Page 30
    the driver for the supported adapter. 2. card, connector. If the problem persists, call for service. 0x0D Explanation: Could not allocate enough memory for transmit queues. Action: 1. From the Windows Windows NT desktop, select Start -> Control Panel -> Networks -> Adapters. 2. Select your IBM
  • IBM 8654 | Hardware Maintenance Manual - Page 31
    the registry. Action: Remove the adapter driver and reinstall it. If the problem persists, call for service. All other 4character hexadecimal codes Action: Call for service. Ethernet teaming messages: Table 7. NDIS (Windows NT or Windows 2000) driver teaming messages for the Ethernet controller
  • IBM 8654 | Hardware Maintenance Manual - Page 32
    Windows NT or Windows 2000) driver Power checkout Power problems can be difficult to troubleshoot. For instance general procedure for troubleshooting power problems is as the cables and power connectors to all internal and board c. 1 Microprocessor d. 1 Terminator card e. Memory module (with a minimum
  • IBM 8654 | Hardware Maintenance Manual - Page 33
    configuration one at a time until the problem is isolated. To use this method it Outside the U.S. and Canada, call your IBM reseller or IBM marketing representative. Note: After you replace the and follow any special handling and installation instructions supplied with the replacement battery. 2. Turn
  • IBM 8654 | Hardware Maintenance Manual - Page 34
    is replaced within two minutes of removal • Cables for optional adapters are routed according to the instructions provided with the adapters (ensure that cables are not restricting air flow) • The fans are . See "Features and specifications" on page 4. 26 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 35
    Note: The server is not designed to operate in an enclosed environment. The xSeries 300 should not reside behind a glass door in its rack enclosure. For more information on specific temperature error messages, see "Temperature error messages" on page 95. Chapter 3. Diagnostics 27
  • IBM 8654 | Hardware Maintenance Manual - Page 36
    28 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 37
    network boot protocols and boot order, to select OS wake up support, and to set menu wait times. • ServeRAID programs If there program This section provides the instructions needed to start the full Configuration/Setup menu. 3. Follow the instructions that appear on the screen. Choices available
  • IBM 8654 | Hardware Maintenance Manual - Page 38
    IBM Netfinity Setup - © IBM Corporation 1998 Configuration/Setup Utility • System Summary • System Information • of the BIOS stored in the flash electronically erasable programmable ROM (EEPROM). - System Card Data Select this choice to view vital product data (VPD) for some server components.
  • IBM 8654 | Hardware Maintenance Manual - Page 39
    and Time Select this choice to set the system date and time and to change the system time sent to the Advanced System Management Processor (service processor) when the server is started. This choice appears only on the full Configuration/Setup Utility main menu. The system time is in a 24-hour
  • IBM 8654 | Hardware Maintenance Manual - Page 40
    to alert you that the system might malfunction if these options are configured incorrectly. Follow the instructions on the screen carefully. - Processor Serial Number Access Select this choice to identify if of the core chip set on the system board. 32 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 41
    make changes here unless directed to do so by an IBM authorized service representative. - Cache Control Select this choice to enable with reduced memory capacity. If this occurs, you must manually enable the memory bank after the problem is corrected. Select Memory Settings from the Advanced Setup
  • IBM 8654 | Hardware Maintenance Manual - Page 42
    from your hardware. Switch block (SW1) To set the password override switch: 1. Review the information in "Before you begin" on page 42. 34 Hardware Maintenance Manual: xSeries 330 1 2 345 67 8 OFF
  • IBM 8654 | Hardware Maintenance Manual - Page 43
    2. Turn off the server and peripheral devices and disconnect all external cables and power cords; then, remove the cover. See "Removing the cover" on page 44. 3. Toggle switch 8 on switch block 1 on the system board. This clears the power-on password for one boot cycle. Note: This means that you can
  • IBM 8654 | Hardware Maintenance Manual - Page 44
    controller settings. To reset the SCSI controller to its default values, press F6; then, follow the instructions that appear on the screen. You can view or change the following controller settings: - Host Adapter value of Enabled. - Boot Device Options 36 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 45
    ) order • Select whether or not to display setup prompt • Set menu wait time • Select OS wake up support Starting the PXE boot agent utility program The following sections provide the instructions needed to start the PXE Boot Agent Utility and descriptions of the menu choices available. To start the
  • IBM 8654 | Hardware Maintenance Manual - Page 46
    Press the F4 key to exit. 4. Follow the instructions on the screen to change the settings of the value. There are no other network boot protocols supported. • Boot Order Select this choice to change Legacy OS wake up support Select this choice to allow/disallow a non-windows operating system to use
  • IBM 8654 | Hardware Maintenance Manual - Page 47
    to help you add options to the server. Some option-removal instructions are provided, in case you need to remove one option to install another. For a list of supported options for the server, see the Server Proven list at: http://www.ibm.com/pc/compat Major components of the xSeries 330 server The
  • IBM 8654 | Hardware Maintenance Manual - Page 48
    in the following sections show the components on the system board. System board options connectors The following illustration identifies the connectors on the system board. C2T (in) port (U38) USB 1 port (J13 the password override switch" on page 34. 40 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 49
    The following table describes the function for each switch. Table 9. Switches 1-8. Switch number Switch description 1 Reserved. 2 Reserved. 3 Reserved. 4 Reserved. 5 Force power-on. The default setting is Off (disabled). 6 Reserved. The default setting is Off. 7 Reserved. The
  • IBM 8654 | Hardware Maintenance Manual - Page 50
    supported options for the server, refer to http://www.ibm.com/pc/us/compat on the World Wide Web. • For your convenience during setup and service . • Cables for optional adapters are routed according to the instructions provided with the adapters. • A failed fan is replaced within Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 51
    Rack installation Do the following to install the server in the rack. Reverse the steps to remove the server from the rack. 1. Lift and place the server on the lower edge of the mounting bracket. 2. Slide the server as far back as it will go. 3. Using the thumb screws on the front of the server;
  • IBM 8654 | Hardware Maintenance Manual - Page 52
    component interconnect (PCI) adapter slots on the system board with riser cards installed in them. Attention: Your server also comes with an integrated video controller on the system board. When you install a video adapter in a PCI slot, the server BIOS automatically disables the integrated
  • IBM 8654 | Hardware Maintenance Manual - Page 53
    documentation that comes with the adapter and follow those instructions in addition to the instructions in this chapter. If you need to change Because of this technique, you can install PCI adapters that currently do not support sharing of PCI interrupts. • PCI slots 1 and 2 and the integrated SCSI
  • IBM 8654 | Hardware Maintenance Manual - Page 54
    " on page 110. 1. Review the safety precautions that are listed in "Chapter 9. Related service information," on page 107. 2. Turn off the server and peripheral devices and disconnect all external this document might differ slightly from your hardware. 46 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 55
    card Expansion slot clip Tab Expansion slot cover Expansion slot 5. Remove the expansion-slot cover. 6. Refer to the documentation that comes with your adapter for any cabling instructions the connector on the PCI riser-card. c. Press the adapter firmly into the riser-card connector. Attention
  • IBM 8654 | Hardware Maintenance Manual - Page 56
    page 44. 11. Turn on the server. Hard disk drives The server supports two 1-inch (26 mm) slim 3.5-inch low voltage differential (LVD) problem with your hard disk drive. • The drive must be a low voltage differential drive (LVD), and have a single connector attached (SCA) connector Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 57
    discharge-sensitive devices" on page 110. • Check the instructions that come with the drive for more information about installing the perpendicular to the drive). b. Align the rails on the drive assembly with the guide rails in the drive bay. c. Gently push the drive assembly into the bay
  • IBM 8654 | Hardware Maintenance Manual - Page 58
    be a low-voltage differential drive (LVD), and have a single connector attached (SCA) connector. • The hard disk drive bays connect to a SCSI backplane. "Handling electrostatic discharge-sensitive devices" on page 110. • Check the instructions that come with the drive to see if you need to set any
  • IBM 8654 | Hardware Maintenance Manual - Page 59
    the hot-swap bay: a. Ensure the tray handle is open (that is, perpendicular to the drive). b. Align the rails on the drive assembly with the guide rails in the drive bay. c. Gently push the drive assembly into the bay until the drive connects to the backplane. d. Push the tray handle toward
  • IBM 8654 | Hardware Maintenance Manual - Page 60
    is open (that is, perpendicular to the drive). b. Align the rails on the drive assembly with the guide rails in the drive bay. c. Gently push the drive assembly into the bay until the drive connects to amber light is on continuously, the drive has failed. 52 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 61
    cables; then, remove the cover (see "Removing the cover" on page 44 for details). 3. If necessary, remove the PCI card in slot 2 for easier access to the DIMM connectors. 4. Touch the static-protective package containing the DIMM to any unpainted metal surface on the server. Then, remove the DIMM
  • IBM 8654 | Hardware Maintenance Manual - Page 62
    is set to Enabled (its default setting), you must restart the server three times (a "threeboot reset") to force the system BIOS to reset the memory connector or bank of connectors from Disabled to Enabled. 54 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 63
    of supported operating systems, see http://www.ibm. com/pc/us/compat/ on the World Wide Web. 3. If the server comes with one microprocessor, it is installed in microprocessor connector 1. This is the startup (boot) microprocessor. If you install a second microprocessor in microprocessor connector
  • IBM 8654 | Hardware Maintenance Manual - Page 64
    following Web site and use a search term of ESD: http://www.ibm.com/ 1. Review the safety precautions listed in "Safety information" on the terminator card from the microprocessor connector. (After you remove the new microprocessor from the static-protective package, place the terminator card in the
  • IBM 8654 | Hardware Maintenance Manual - Page 65
    the heat sink release lever in the up position. Note: If you remove the microprocessor later, remember to install the terminator card in the appropriate microprocessor connector. d. Press the heat sink release lever down into the locked position once the clip is in place. 8. Replace the clear shield
  • IBM 8654 | Hardware Maintenance Manual - Page 66
    to replace the clear shield. Slot Top view of heatsink Terminator card Heatsink release lever Clip Heatsink Microprocessor 5. To remove microprocessor #1: retainer latch by reversing step a. above. Note: If a terminator card is being installed in microprocessor slot #1, it is not necessary to
  • IBM 8654 | Hardware Maintenance Manual - Page 67
    Slot Top view of heatsink Terminator card Heatsink release lever Clip Heatsink Microprocessor Retainer clip Fan assembly replacement The server comes with six replaceable fans. Attention: Replace a fan that has failed within
  • IBM 8654 | Hardware Maintenance Manual - Page 68
    by checking the LED at each fan; a lit LED indicates the fan to replace. See "Identifying problems using status LEDs" on page 13. Note: The fan LEDs are illuminated by the light path diagnostic to turn off the server to perform further troubleshooting. 60 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 69
    power cord and all external cables to the server, then plug the power cords into electrical outlets. I/O connector locations and ports The following illustration shows the input/output connectors (ports) and the expansion slots on the rear of the server. For pin assignments and other details about
  • IBM 8654 | Hardware Maintenance Manual - Page 70
    address assignments to prevent or resolve address conflicts. This serial port is also manually configurable from inside of the server. The following table lists the function of each of the connectors which can be used to manually configure the serial port. You will also need to refer to the figure
  • IBM 8654 | Hardware Maintenance Manual - Page 71
    USB 1 or USB 2. If you plan to attach more than two USB devices, you must use a hub to connect the devices. The hub provides multiple connectors for attaching additional external USB devices. USB technology provides up to 12 megabits-per-second (Mbps) speed with a maximum of 127 external devices and
  • IBM 8654 | Hardware Maintenance Manual - Page 72
    video resolution that should be used with the C2T chain is 1024 x 768. Connect the C2T breakout cable to the C2T OUT port of server 1. Server 1 is usually the server at the bottom of the rack. Connect the white connector 1 In Out Video Mouse Keyboard 64 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 73
    C2T chaining cable The C2T Chaining cable is designed to prevent the accidental connection of two OUT connectors with physically different connector shells and different color connector covers (Black = OUT, White = IN). C2T breakout cable A keyboard, monitor, and mouse or pointing device are
  • IBM 8654 | Hardware Maintenance Manual - Page 74
    blue 15-pin connector. 5 1 15 11 Table 13. Video-connector (15-pin female connector: On the end of the C2T device breakout cable, there is one auxiliary-device connector that supports a mouse or other pointing device. This connector is identified by the mouse icon. 66 Hardware Maintenance Manual
  • IBM 8654 | Hardware Maintenance Manual - Page 75
    cable to the RJ-45 connector on the rear of the server to supports auto-negotiation drivers are provided on the ServerGuide CDs. Failover for redundant Ethernet: The IBM Netfinity 10/100 Ethernet Adapter or the IBM 10/100 Etherjet PCI family of adapters are optional redundant network interface cards
  • IBM 8654 | Hardware Maintenance Manual - Page 76
    running with Windows NT 4.0 IBM Networking Web site at: http://www.ibm.com/networking/support support 802.1p for tagging to be effective. After you set up the priority filter in Priority Packet, you must launch IBMSet and select 802.1p/802.1Q Tagging on the Advanced tab. 68 Hardware Maintenance Manual
  • IBM 8654 | Hardware Maintenance Manual - Page 77
    NT 4.0 or later, or Novell NetWare 4.1x or later. Notes: 1. Windows NT versions prior to 4.0 do not support VLANs. 2. VLANs require NT 4.0 with Service Pack 3.0 and the NDIS driver hotfix from Microsoft. 3. In Windows NT, VLANs cannot be implemented on controllers that have been configured for
  • IBM 8654 | Hardware Maintenance Manual - Page 78
    for more information. 2. Double-click the Network icon in the Control Panel window. 3. On the Adapters tab, select the adapter you want to be on serial-port connector, labeled A on the rear of the server. You can attach a dedicated modem to the D-shell connector on the Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 79
    . Note: Refer to the following illustration to locate the connectors on the back of your server. The ASM connectors on the back of the server are referred to in following: Important: The Advanced System Management bus is designed to support up to 12 units or servers. However, when using the Advanced
  • IBM 8654 | Hardware Maintenance Manual - Page 80
    to the RS-485 (B) port on the next server. Ethernet cable with RJ-14 connectors RS-485(A) RS-485(B) RS-485(A) RS-485(B) RS-485(A) RS-485(B) 5. OUT ports. Before you begin review the following: • The supported maximum number of servers connected in a single chain with C2T Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 81
    port of server 1. Note: Server 1 is usually the server at the bottom of the rack. b. Connect the white connector of a C2T chaining cable to the C2T IN port of server 1. c. Connect the black connector of the C2T chaining cable to the C2T OUT port of the server above it. Refer to the
  • IBM 8654 | Hardware Maintenance Manual - Page 82
    instructions). 4 In Out 3 In Out 2 In Out 1 In Out Video driver. problem persists, disconnect the C2T chaining cable from problem persists, the problem is due to either a faulty breakout cable or a faulty server. If the problem ceased to exist after the chaining cable was disconnected, the problem
  • IBM 8654 | Hardware Maintenance Manual - Page 83
    used to identify the failing node (cable or system) consists of reconnecting the chain a node at a time until the failing node is isolated. Cable management Use the cable ties and hook-and-loop straps that are supplied with your server to secure the cables. Note: Do not secure cables too tightly.
  • IBM 8654 | Hardware Maintenance Manual - Page 84
    76 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 85
    only) Field Replacement Units (FRUs) should be replaced by qualified service personnel only. Note: Read"Safety information" on page 107 and "Before you begin" on page 42. page 59. 5. Remove the screws. 6. Gently pull back and up to remove the drives from the chassis. © Copyright IBM Corp. 2000 77
  • IBM 8654 | Hardware Maintenance Manual - Page 86
    connector. 2) To replace the diskette drive cable, pull up on the connector latch until it is unlocked; then, insert the end of the cable into the connector and gently push down on the connector Gently loosen the connector of the slim adapter board from the CD-ROM drive connector until it pulls free
  • IBM 8654 | Hardware Maintenance Manual - Page 87
    remove the power supply: Note: Read"Safety information" on page 107 and "Before you begin" on page 42. 1. Power off the server. Chapter 6. FRU information (service only) 79
  • IBM 8654 | Hardware Maintenance Manual - Page 88
    Remove any adapters and put them in a safe place. 4. Disconnect cables. 5. Gently lift up on the card to disconnect it from the system board port. System board To remove the system board: Note: Read"Safety 3. Disconnect all cables from the system board. 80 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 89
    board. 8. Remove the four screws from the rear of the server. 9. Pull up on the system board to remove from the chassis. Chapter 6. FRU information (service only) 81
  • IBM 8654 | Hardware Maintenance Manual - Page 90
    82 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 91
    supports Netfinity 4100R servers. The Symptom-to-FRU lists symptoms, errors, and the possible causes. The most likely cause is listed first. Use this Symptom-to-FRU index to help you decide which FRUs to have available when servicing failed) 1. DIMM 2. System Board © Copyright IBM Corp. 2000 83
  • IBM 8654 | Hardware Maintenance Manual - Page 92
    2-3-3 (Screen retrace failed) 1. System Board 2-3-4 (Search for video ROM failed) 1. System Board 2-4-1 (Video failed; screen believed 1. System Board operable) 3-1-1 (Timer tick System Board 3. DIMMs 4. DASD Backplane 5. DASD Power Cable 84 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 93
    beep after completing POST 1. System Board and the system operates correctly. No beep and no video (System 1. See "Undetermined problems" on page 98 Attention LED is OFF) No beep and no video (System 1. See "Information panel system error LED" Attention LED is ON) Information panel system error
  • IBM 8654 | Hardware Maintenance Manual - Page 94
    LEDs off (Check System Error Log for error condition, then clear System Error Log when the problem is found.) 1. System Error Log is 75% full; clear the log. 2. PFA alert 2) System Board e. System Board over recommended temperature 1) System Board. 86 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 95
    -250-000 ECC) (Failed System Board 1. System Board 001-250-001 Board ECC) (Failed Processor 1. System Board 005-XXX-000 (Failed Video test) 1. Video adapter (if installed) 2. System Board 011-XXX-000 Port test) (Failed COM1 Serial 1. Check loopback plug connected to externalized serial port
  • IBM 8654 | Hardware Maintenance Manual - Page 96
    and refer to the ServeRAID Hardware Maintenance Manual for more information. 2. Cable 3. System Board 165-XXX-000 test) (Failed Service Processor 1. System Board 180-XXX-000 180-XXX-001 panel test) (Failed information LED 1. Switch Card / Information LED Panel 180-XXX-003 (Failed System Board
  • IBM 8654 | Hardware Maintenance Manual - Page 97
    SCSI ID NN. (Refer to the Help and Service Information appendix of the tape drive's User Guide.) 4. System Board or SCSI Controller. (Run diagnostics 3. CD-ROM Drive 1. Insert the end of a paper clip into the manual tray-release opening. 2. Run CD-ROM diagnostics 3. CD-ROM Drive 1. Run
  • IBM 8654 | Hardware Maintenance Manual - Page 98
    and reset 1. Reseat connector button does work. (SW 1-5 is force poweron switch.) 2. Switch Card 3. System Board Diskette Video Diagnostics. If diagnostics pass, the problem may be a video driver. monitor for adjusting and testing 3. Display Adapter / System Board instructions. No video
  • IBM 8654 | Hardware Maintenance Manual - Page 99
    3. System Board 164 (Memory configuration changed, see "Memory settings" on page 33.) 1. Run Configuration/Setup 2. DIMM 3. System Board. 165(Service Processor failure) 1. System Board. 175 (Hardware error) 1. System Board 176 (Computer cover or cable cover was removed without a key being
  • IBM 8654 | Hardware Maintenance Manual - Page 100
    Configuration/Setup 3. System Board 11XX (System board serial port 1 or 2 error) 1. Disconnect external cable on serial port. 2. Run Configuration/Setup 3. System Board 92 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 101
    1. Do the following before replacing a FRU: communicate to the Service Processor, but the Service Processor failed to respond at the start of POST.) a. Remove (Video controller test failure) 1. Video Adapter (if installed) 2. System Board 2462 error) (Video memory configuration 1. Video
  • IBM 8654 | Hardware Maintenance Manual - Page 102
    Failing Adapter 4. System Board 00180700, 00180800 error) (General PCI 1. System Board 2. PCI Card 01295085 test error) (ECC checking hardware 1. System Board. 2. Processor 01298001 processor 1) ( same stepping level and cache size. 2. Processor 2 94 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 103
    SCSI Errors One or more of 1. External SCSI devices must be powered-on before you power-on the following might be causing the problem: the server. • A failing SCSI device (adapter, drive, 2. The cables for all external SCSI devices are connected correctly. controller) 3. If you have attached
  • IBM 8654 | Hardware Maintenance Manual - Page 104
    Refer to the following tables when experiencing system shutdown related to voltage or temperature problems. Voltage related system shutdown Message Action System shutoff due to "X" current over critical; current on voltage bus "X" under minimum value) 96 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 105
    due to "X" supply under voltage) System shutoff due to VRM "X" over voltage Action 1. Check power supply connectors 2. Replace power supply 1. Check power supply connectors 2. Replace power supply 1. Replace power supply Temperature related system shutdown Message Action System shutoff due to
  • IBM 8654 | Hardware Maintenance Manual - Page 106
    Replace system board Undetermined problems You are here because the Note: A corrupt CMOS can cause undetermined problems. 1. Ensure that the system is minimum operating requirements and retry. If problem remains, suspect the following FRUs Microprocessor d) 1 Terminator Card e) Memory Module (with
  • IBM 8654 | Hardware Maintenance Manual - Page 107
    the following FRUs in the order listed: a) Power supply b) System board If problem goes away, replace removed items one at a time until failing item is found (power-on and reconfigure system each time). Notes: 1. If the problem goes away when you remove an adapter from the system, and replacing that
  • IBM 8654 | Hardware Maintenance Manual - Page 108
    100 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 109
    Chapter 8. Parts listing System The xSeries 330 Parts Listing supports the following models: 11Y, 31Y. 18 17 16 15 14 13 12 © Copyright IBM Corp. 2000 1 2 3 4 5 6 7 8 9 10 11 101
  • IBM 8654 | Hardware Maintenance Manual - Page 110
    Heat Sink/Clip Assembly (All Models) Terminator Card (All Models) Fan with Connector (All Models) 3.5 Floppy Disk Drive, 12. (All Models) 866/133 MHz Processor (Model 31Y only) PCI Riser Card (All Models) Memory, 256MB/133MHz ECC (optional) 102 Hardware Maintenance Manual: xSeries 330 FRU Number
  • IBM 8654 | Hardware Maintenance Manual - Page 111
    Index System Part (Model Number) 9.1GB 7200rpm Ultra 160 SCSI (All Models) (optional) 18.2GB 7200rpm Ultra 160 SCSI (All Models) (optional) 9.1GB 10Krpm Ultra 160 SCSI (All Models) (optional) 18.2GB 10Krpm Ultra 160 SCSI (All Models) (optional) 36.4GB 10Krpm Ultra 160 SCSI (All Models) (optional)
  • IBM 8654 | Hardware Maintenance Manual - Page 112
    , Philippines, Saudi Arabia, Suriname, Taiwan, Trinidad (West Indies), Venezuela FRU No. 01K9851 01K9853 12J5120 12J5122 12J5124 12J5126 12J5128 12J5987 55H6643 55H6646 76H4865 104 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 113
    Power cord United States of America FRU No. 6952301 (110) 1838574 (220) 36L8886 (220V/15A) Chapter 8. Parts listing 105
  • IBM 8654 | Hardware Maintenance Manual - Page 114
    106 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 115
    are designed to help you isolate problems. They are written with the assumption that you have model-specific training on all computers, or that are familiar with the computers, functions, terminology, and service information provided in this manual. Safety information The following section contains
  • IBM 8654 | Hardware Maintenance Manual - Page 116
    telecommunication systems, networks, and modems before you open the server covers, unless instructed otherwise in the installation and configuration procedures. Observe the following rules when from grounds such as metal floor strips and machine frames. 108 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 117
    instructions and service personnel from injury. This guide addresses IBM features or options not covered by this inspection guide . If any unsafe conditions are present, you must determine how serious the apparent hazard could be and whether you can continue without first correcting the problem
  • IBM 8654 | Hardware Maintenance Manual - Page 118
    ground connector in good obvious non-IBM alterations. Use good judgment as to the safety of any non-IBM alterations. 6. to provide protection that meets the specific service requirement. Note: The use of system. You can use coax or connector-outside shells on these systems. - Use the
  • IBM 8654 | Hardware Maintenance Manual - Page 119
    is evidence of fire, water, or structural damage. • Disconnect the attached power cords, telecommunications systems, networks, and modems before you open the device covers, unless instructed otherwise in the installation and configuration procedures. Chapter 9. Related service information 111
  • IBM 8654 | Hardware Maintenance Manual - Page 120
    cables to devices. 3. Attach signal cables to connectors. 4. Attach power cords to outlet. 5. Turn connectors. 4. Remove all cables from devices. • Statement 2 CAUTION: When replacing the lithium battery, use only IBM hazardous laser radiation. There are no serviceable parts inside the device. • Use
  • IBM 8654 | Hardware Maintenance Manual - Page 121
    than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source. 2 1 Chapter 9. Related service information 113
  • IBM 8654 | Hardware Maintenance Manual - Page 122
    • Statement 10 CAUTION: Do not place any object weighing more than 82 kg (180 lbs.) on top of rack-mounted devices. 114 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 123
    ção. • Conecte e desconecte cabos conforme descrito na seguinte tabela, ao instalar ou movimentar este produto ou os dispositivos conectados, ou ao abrir suas tampas. Chapter 9. Related service information 115
  • IBM 8654 | Hardware Maintenance Manual - Page 124
    a bateria de lítio, utilize apenas uma bateria IBM, Número de Peça 33F8354 ou uma bateria em contato com a área de atendimento a clientes IBM, pelo telefone (011) 889-8986, para obter informações sobre como enviar a bateria pelo correio para a IBM. Instrução 3 PRECAUCIÓN: Quando produtos a laser
  • IBM 8654 | Hardware Maintenance Manual - Page 125
    ção. Para remover toda a corrente elétrica do dispositivo, assegure que todos os cabos de alimentação estejam desconectados da fonte de energia elétrica. Chapter 9. Related service information 117
  • IBM 8654 | Hardware Maintenance Manual - Page 126
    2 1 CUIDADO: Instrução 10 CUIDADO: Não coloque nenhum objeto com peso superior a 82 kg (180 lbs.) sobre dispositivos montados em rack. 118 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 127
    Chapter 9. Related service information 119
  • IBM 8654 | Hardware Maintenance Manual - Page 128
    120 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 129
    Chapter 9. Related service information 121
  • IBM 8654 | Hardware Maintenance Manual - Page 130
    122 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 131
    Chapter 9. Related service information 123
  • IBM 8654 | Hardware Maintenance Manual - Page 132
    124 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 133
    Chapter 9. Related service information 125
  • IBM 8654 | Hardware Maintenance Manual - Page 134
    126 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 135
    de procéder aux opérations décrites par les instructions. Notice n° 1 DANGER Le courant électrique passant systèmes de télécommunication et aux modems (sauf instruction contraire mentionnée dans les procédures d'installation et de vous aux instructions ci-dessous pour connecter et déconnecter les diff
  • IBM 8654 | Hardware Maintenance Manual - Page 136
    ATTENTION: Remplacez la pile au lithium usagée par une pile de référence identique exclusivement - voir la référence IBM - ou par une pile équivalente recommandée par le fabricant. Si votre système est doté d'un opération de maintenance à l'intérieur. 128 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 137
    é dispose de plusieurs cordons d'alimentation. Pour isoler totalement l'unité du réseau électrique, débranchez tous les cordons d'alimentation des socles de prise de courant. Chapter 9. Related service information 129
  • IBM 8654 | Hardware Maintenance Manual - Page 138
    2 1 Notice n° 10 ATTENTION: Ne posez pas d'objet dont le poids dépasse 82 kg sur les unités montées en armoire. 130 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 139
    . • Nur nach den nachfolgend aufgeführten Anweisungen arbeiten, die für Installation, Transport oder öffnen von Gehäusen von Personal Computern oder angeschlossenen Einheiten gelten. Chapter 9. Related service information 131
  • IBM 8654 | Hardware Maintenance Manual - Page 140
    ät einschalten. Hinweis 2 ACHTUNG: Eine verbrauchte Batterie nur durch eine Batterie mit der IBM Teilenummer 33F8354 oder durch eine vom Hersteller empfohlene Batterie ersetzen. Wenn Ihr System ein Modul Die Verkleidung des CDROM-Laufwerks nicht öffnen. 132 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 141
    mehr als ein Netzkabel aufweisen. Um die gesamte Stromversorgung des Servers auszuschalten, muß sichergestellt werden, daß alle Netzkabel aus den Netzsteckdosen herausgezogen wurden. Chapter 9. Related service information 133
  • IBM 8654 | Hardware Maintenance Manual - Page 142
    2 1 Hinweis 10 ACHTUNG: Keine Gegenstände, die mehr als 82 kg wiegen, auf Rack-Einheiten ablegen. 134 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 143
    . • Collegare e scollegare i cavi come descritto nella seguente tabella quando si effettuano l'installazione, la rimozione o l'apertura dei coperchi di questo prodotto o delle unità collegate. Chapter 9. Related service information 135
  • IBM 8654 | Hardware Maintenance Manual - Page 144
    2 ATTENZIONE: Quando si sostituisce la batteria al litio, utilizzare solo una batteria IBM con numero parte 33F8354 o batterie dello stesso tipo o di tipo equivalente consigliate dal fibre ottiche o trasmettitori, prestare attenzione a quanto segue: 136 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 145
    utilizzo di controlli, regolazioni o l'esecuzione di procedure non descritti nel presente manuale possono provocare l'esposizione a radiazioni pericolose. PERICOLO Alcuni prodotti laser contengono all siano scollegati dalla sorgente di alimentazione. Chapter 9. Related service information 137
  • IBM 8654 | Hardware Maintenance Manual - Page 146
    2 1 Avviso 10 ATTENZIONE: Non poggiare oggetti che pesano più di 82 kg sulla parte superiore delle unità montate in rack. 138 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 147
    Chapter 9. Related service information 139
  • IBM 8654 | Hardware Maintenance Manual - Page 148
    140 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 149
    Chapter 9. Related service information 141
  • IBM 8654 | Hardware Maintenance Manual - Page 150
    siguiente cuando desee realizar una operaciín de instalaciín, de traslado o de apertura de las cubiertas para este producto o para los dispositivos conectados. 142 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 151
    desee sustituir la batería de litio, utilice únicamente el número de pieza 33F8354 de IBM o cualquier tipo de batería equivalente que recomiende el fabricante. Si el sistema tiene un fibra íptica o transmisores), tenga en cuenta las advertencias siguientes: Chapter 9. Related service information 143
  • IBM 8654 | Hardware Maintenance Manual - Page 152
    ín. Para eliminar la corriente eléctrica del dispositivo, asegúrese de desconectar todos los cables de alimentaciín de la fuente de alimentaciín. 144 Hardware Maintenance Manual: xSeries 330
  • IBM 8654 | Hardware Maintenance Manual - Page 153
    2 1 Declaración 10 PRECAUCIÓN: No coloque ningún objeto que pese más de 82 kg (180 libras) encima de los dispositivos montados en bastidor. Chapter 9. Related service information 145
  • IBM 8654 | Hardware Maintenance Manual - Page 154
    this survey, complete it, and then fax it to IBM HMM Survey at 919-543-8167 (USA). Name Phone number 1. Do you like this manual? ❑ Yes ❑ No 2. What would you like to see added, changed, or deleted in this manual? 3. What is your service experience level? ❑ Less than five years ❑ More than
  • IBM 8654 | Hardware Maintenance Manual - Page 155
    in problem determination. If possible, have this information available when requesting assistance from Service Support and IBM operates. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Subject to IBM
  • IBM 8654 | Hardware Maintenance Manual - Page 156
    service. The evaluation and verification of operation in conjunction with other products, except those expressly designated by IBM, are the responsibility of the user. The following items are trademarks of the IBM Corporation in the United States or other countries or both: HelpCenter IBM
  • IBM 8654 | Hardware Maintenance Manual - Page 157
  • IBM 8654 | Hardware Maintenance Manual - Page 158
    IBM@ Part Number: 06P1796 File Number: Printed in the United States of America on recycled paper containing 10% recovered post-consumer fiber. 06P1796 0406P1796
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
IBM
Hardware Maintenance Manual
xSeries 330