Icom IC-F5123D Instruction Manual - Page 5

1 PANEL DESCRIPTION ■ Front panel 1 q Function display (p. 2) w e Speaker 2 3 4 5 6 t 7 r 8 q AF VOLUME CONTROL KNOB [VOL] t MICROPHONE CONNECTOR 9 Rotate the knob to adjust the audio output level. • Minimum audio level is pre-programmed. (p. 12) w UP/DOWN KEYS [CH Up]/[CH Down] Connect the supplied or optional microphone. 10 N EVER connect non-specified microphones. The pin assign- ments may be different and may damage the transceiver. 11 Push to select an operating channel, etc. * The desired function can be assigned by your dealer. (p. 3) e POWER KEY [ ] D Microphone 12 The supplied or optional microphone has a PTT switch and a 13 Push to turn the power ON or OFF. • The following optional functions are available at power ON: hanger hook. • The following functions are available when the microphone is ON or 14 - Automatic scan start - Password prompt r DEALER-PROGRAMMABLE KEYS Required functions can be independently programmed by your dealer. (p. 3) OFF hook (depending on the preprogramming): 15 - Automatic scan starts when you put it ON hook. - Scan is cancelled when you take it OFF hook. 16 - Scan is paused when you take it OFF hook. - Automatically selects the Priority channel when you take it OFF hook. - Sets to the 'Inaudible' mode (mute state) when you put it ON hook. - Sets to the 'Audible' mode (unmute state) when you take it OFF hook. 1