Icom IC-F5123D Operating Guide - Page 15
Transmitting a Status Message, Push [CH Up] or [CH Down] to select STATUS.
View all Icom IC-F5123D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
IDAS OPERATION 3 D Transmitting a Status Message 1 The transceiver has the ability to send a preprogrammed status message. t P ush [Digital Button] again to enter the Individual or Talkgroup ID selection mode. 2 There are up to 100 status messages that can be sent. • The preprogrammed ID name is displayed. 3 • When an ID name is not programmed, the ID code is displayed. q P ush [Digital Button] to enter the application selection • The primary ID can be preset to display first. 4 mode. • "VOICE" appears. y P ush [CH Up] or [CH Down] to select the desired ID name (or ID code). 5 • To change to the desired call type, hold down [Digital Button] for 6 1 second while in standby. After changing, the transceiver automatically enters the application selection mode. 7 w P ush [CH Up] or [CH Down] to select "STATUS." 8 e P ush [Digital Button] again to enter the status message selection mode. Individual or Talkgroup ID name is displayed. 9 • A preprogrammed status message is displayed. r P ush [CH Up] or [CH Down] to select the desired mes- sage. u P ush [PTT] to transmit the status message. • "STAT TX" is displayed. i Release [PTT]. 10 11 • "STAT OK" is displayed after receiving an acknowledgement 12 from the base station. • "STA FAIL" is displayed if there is no acknowledgment from the 13 base station. 14 o A fter a specified time period has passed, the transceiver will return to standby. 15 16 Preprogrammed status message is displayed. 12