Icom IC-F62D Accessories Guide
Icom IC-F62D Manual
 |
View all Icom IC-F62D manuals
Add to My Manuals
Save this manual to your list of manuals |
Icom IC-F62D manual content summary:
- Icom IC-F62D | Accessories Guide - Page 1
VHF/UHF DIGITAL TRANSCEIVERS Iç-F52D Iç-F62D Thank you for choosing this Icom product. READ ALL INSTRUCTIONS carefully and completely before using this product. This guide describes about the IC-F52D/IC-F62D's accessories and option details. Supplied accessories Battery pack Belt clip Connector - Icom IC-F62D | Accessories Guide - Page 2
Attaching accessories (Continued) DDBelt clip To attach: 1. Remove the battery pack from the transceiver, if it is attached. 2. Slide the belt clip in the direction of the arrow until the belt clip is locked and makes a 'click' sound. Belt clip DDConnector cover CAUTION: BE SURE to attach the - Icom IC-F62D | Accessories Guide - Page 3
Options DDHM-222 speaker microphone Microphone [PTT] [Emer] Speaker Earphone jack Turn OFF the transceiver before attaching or detaching the microphone NOTE: ••NEVER immerse the connector in water. If the connector becomes wet, BE SURE to dry it before attaching to the transceiver. ••The - Icom IC-F62D | Accessories Guide - Page 4
Options (Continued) DDMB-136 belt clip Belt clip Base clip To attach: 1. Detach the battery pack, if attached. 2. Slide the base clip in the direction of the arrow until the clip locks and makes a "click" sound. 3. Attach the battery pack to the transceiver. Base clip Battery pack 6. Once - Icom IC-F62D | Accessories Guide - Page 5
Orange Charging Green Charging is completed. Blinks orange and green Charging failed. It may have some problems. Fuse replacement If a fuse blows, find and repair the cause of the problem. Then replace the damaged fuse with a new, adequately rated fuse. Fuse type: 5 A/58 V (low profile mini - Icom IC-F62D | Accessories Guide - Page 6
˚F ~ 104˚F ••Power supply requirement: 12 ~ 16 V DC or the specified power adapter (BC-228) - 6 - 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan A7397-8EX © 2017 Icom Inc.
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
– 1 –
ACCESSORIES GUIDE
VHF/UHF DIGITAL TRANSCEIVERS
Iç-F52D
Thank you for choosing this Icom product.
READ
ALL INSTRUCTIONS
carefully and completely
before using this product.
This guide describes about the IC-F52D/IC-F62D’s
accessories and option details.
Supplied accessories
Iç-F62D
Battery pack
Belt clip
Connector cover
(with a screw)
NOTE:
• Some accessories are not supplied, or the shape
is different, depending on the transceiver version.
•
Confirm both battery sliding locks are locked
in place, when attaching the battery to the
transceiver. Both sliding locks make a ‘click’ sound
when locked.
Attaching accessories
D
Flexible antenna
Connect the required flexible antenna to the antenna
connector.
CAUTION:
•
DO NOT
carry the transceiver by holding only the
antenna.
•
DO NOT
connect an antenna other than those
listed in the INSTRUCTIONS.
• Transmitting without an antenna may damage the
transceiver.
D
Battery pack
CAUTION: DO NOT
attach or detach the battery
pack when the transceiver is wet or soiled. This may
result in water or dust getting into the transceiver/
battery pack and may damage the transceiver.
To attach:
1.
Slide the battery pack in the direction of the
arrow. (
q
)
2.
Push the battery pack until the battery sliding
locks make a ‘click’ sound. (
w
)
To detach:
1.
Push both battery sliding locks in the direction of
the arrow. (
z
)
• The battery pack is then released.
2.
Lift up to detach the battery pack. (
x
)
NOTE:
Keep the battery pack terminals clean. It’s a
good idea to occasionally clean them.
Battery sliding locks
Battery pack
q
q
w
x
z
z