Icom IC-F62D Accessories Guide - Page 4

Options (Continued) DDMB-136 belt clip Belt clip Base clip To attach: 1. Detach the battery pack, if attached. 2. Slide the base clip in the direction of the arrow until the clip locks and makes a "click" sound. 3. Attach the battery pack to the transceiver. Base clip Battery pack 6. Once the transceiver is locked in place, it swivels, as shown below. NOTE: If the transceiver has been accidentally dropped and the base clip is scratched or damaged, the transceiver may not be properly attached to the holder or swivel. Once the transceiver is locked on place, it swivels 360 degrees. To detach: 1. Turn the transceiver upsidedown in the direction of the arrow and pull it out of the belt clip. NOTE: Hold the transceiver firmly when removing the transceiver from the belt clip. 2. Detach the battery pack. (p. 1-3) 4. Clip the belt clip on your belt. 5. Insert the transceiver upsidedown into the belt clip until the base clip is fully inserted in the groove. NOTE: Hold the transceiver firmly when inserting the transceiver into the belt clip. 3. Lift up the tab on the base clip (q), and then slide the clip in the direction of the arrow (w). BE CAREFUL! DO NOT break your fingernail. w Battery pack q - 4 -