Icom IC-R8500 Instruction Manual - Page 33
Set Mode
View all Icom IC-R8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
s General Set mode is used for programming infrequently changed values or conditions of functions. The IC-R8500 has 2 separate set modes: quick set mode and initial set mode. D Selecting quick set mode Push [SLEEP/ SET ] for 1 sec. • Quick set mode is selected and one of its items appears. Rotate the [M-CH] control to select the desired item. Rotate the main dial to set the values or conditions for the selected item. Repeat steps and to set other items. To exit quick set mode, push [SLEEP/ SET ] again. • Pushing any other switch will also exit quick set mode. D Selecting initial set mode Push [POWER] to turn power OFF. While pushing [SLEEP/ SET ] push [POWER] to turn power ON. • Initial set mode is selected and one of its items appears. Rotate the [M-CH] control to select the desired item. Rotate the main dial to set the values or conditions for the selected item. Repeat steps and to set other items. To exit initial set mode, push [POWER] to turn power OFF. Push [POWER] to turn power ON again. • The conditions selected in initial set mode are now effective. 8 SET MODE Main dial (for contents) SCAN SET [SLEEP/ SET ] (push for 1 sec.) [M-CH] (for items) [DISPLAY EXAMPLE: QUICK SET MODE] WFM ∞ OFF DLY kHz HIGH DIMMER Value or condition Item Item number [POWER] Main dial (for contents) SCAN SET [SLEEP/ SET ] at power ON [M-CH] (for items) [DISPLAY EXAMPLE: INITIAL SET MODE] ON Value or condition REC REMO Item Item number 30