Icom ID-5100A Full Instruction Manual - Page 267

Previous view 12 MENU SCREEN DV Set items (Continued) Digital Monitor (Default: Auto) DV Set > Digital Monitor Select a receive mode when [MONI] on the function menu is touched in the DV mode. • Auto: Receives in the DV mode or the FM mode, depending on the received signal. • Digital: Receives in the DV mode. • Analog: Receives in the FM mode. Digital Repeater Set (Default: ON) DV Set > Digital Repeater Set Turn the digital repeater setting function ON or OFF. In any DV mode except when using the DR function, and when accessing a repeater that has a call sign that is different than the transceiver's setting, this function reads the repeater's signal and automatically sets the repeater call sign in R1 and R2. • OFF: T urns OFF the function. • ON: Automatically sets the repeater call sign. DV Auto Detect (Default: OFF) DV Set > DV Auto Detect Turn the DV mode automatic detect function ON or OFF. If you receive an FM signal in the DV mode, this function temporarily switches to the FM mode. • OFF: T urns OFF the function. The operating mode is fixed to the DV mode. • ON: Automatically selects the FM mode for tempo- rary operation. RX Record (RPT) (Default: ALL) DV Set > RX Record (RPT) The transceiver can record the data of up to 50 individual calls. When the received signal includes a status message ("UR?" or "RPT?") that is sent back from the access repeater, you can record up to 50 messages, or only the last call, in the Received Call Record. • ALL: Records up to 50 calls. • Latest Only: Records only the last call. BK (Default: OFF) DV Set > BK The BK (Break-in) function allows you to break into a conversation, where the two other stations are communicating with call sign squelch enabled. • OFF: Turns OFF the function. • ON: Turns ON the function. NOTE: The BK function is automatically turned OFF when transceiver is turned OFF. EMR (Default: OFF) DV Set > EMR The EMR communication function can be used in the digital mode. With the EMR function, no call sign setting is necessary. When you transmit a call with the EMR function, all transceivers that receive an EMR signal automatically open their squelch to receive the signal. When an EMR signal is received, the audio (voice) will be heard at the specified level, even if the volume is set to a minimum level, or digital call sign or digital code squelch is in use. • OFF: Turns OFF the function. • ON: Turns the function ON. NOTE: The EMR function is automatically turned OFF when transceiver is turned OFF. EMR AF Level (Default: 19) DV Set > EMR AF Level Set the audio output level to between 0 and 32 for when an EMR communication signal is received. When an EMR signal is received, the audio will be heard at the set level, or the [VOL] control level, whichever is higher. To disable the setting, set it to "0." NOTE: After an EMR signal disappears, the audio level will remain at the EMR level. In this case, rotate [VOL] to adjust the audio to a desired level. 12-45