Icom ID-51A Service Manual - Page 9
REMOVING THE MAIN UNIT, Unsolder a point at the antenna connector.
View all Icom ID-51A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
2. REMOVING THE MAIN UNIT 1) Unsolder 2 points on the shield plate. UNSOLDER Solder remover 3) Unsolder a point at the antenna connector. UNSOLDER Solder remover Shield plate 2) Remove 5 screws from the shield plate, and then remove it. 4) Remove 6 screws from the MAIN UNIT, and then remove the MAIN UNIT from the chassis. Screws x5 Screws x6 MAIN UNIT AIN UNIT Shield plate Chassis 3 - 2
3 - 2
2. REMOVING THE MAIN UNIT
1)
Unsolder 2 points on the shield plate.
Shield plate
UNSOLDER
Solder
remover
Screws x5
MAIN UNIT
Shield plate
UNSOLDER
Solder
remover
Screws x6
Chassis
AIN UNIT
2)
Remove 5 screws from the shield plate, and then
remove it.
3)
Unsolder a point at the antenna connector.
4)
Remove 6 screws from the MAIN UNIT, and then
remove the MAIN UNIT from the chassis.