Image Fitness 20.0 Vt Treadmill English Manual - Page 7
Attach the Right Upright 54 to the Base 52
View all Image Fitness 20.0 Vt Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1. Make sure that the power cord is unplugged. Position the Base (52) upside-down as shown. Attach four Base Feet (63) to the Base (52) with four M4.2 x 19mm Tek Screws (26). 1 26 63 26 63 52 26 63 26 63 2. Attach the Wheels (70) to the Base (52) with two 2 M10 x 60mm Bolts (35), four Wheel Spacers (69), and two M10 Nuts (16) as shown. Do not 52 overtighten the Nuts; the Wheels should turn 35 freely. 16 69 70 69 16 35 69 70 69 3. Have a second person hold the Base (52) in the 3 position shown. Identify the Left Upright (53) (the Right Upright [54] has a square hole near the lower end). Hold the Left Upright (53) so that the small holes are positioned as shown. Attach the Left Upright (53) to the Base (52) with two M10 x 58mm Bolts (2) and two M10 Star Washers (9); do not fully tighten the Bolts yet. Attach the Right Upright (54) to the Base (52) in the same way. Small Holes 53 54 Square 2 Hole 9 9 52 2 7