Image Fitness 8.5 Elliptical English Manual - Page 5

ASSEMBLY To hire an authorized service technician to assemble the elliptical exerciser, call toll-free 1-800-445-2480. Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included allen wrenches, assembly requires a phillips screwdriver , an adjustable wrench , and a rubber mallet . As you assemble the elliptical exerciser, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 22. The second number refers to the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not in the parts bag, check to see if it has been pre-assembled. Frame Spacer (83)-1 M10 Split Wave Washer Washer (70)-3 (95)-2 M8.5 Washer (53)-2 M10 Washer (38)-6 M4 x 16mm Screw (66)-4 M4 x 22mm Screw (93)-2 M8 Nylon Locknut (46)-4 M10 Nylon Locknut (29)-6 M8 x 45mm Button Bolt (50)-4 M8 x 25mm Patch Screw (22)-2 M10 x 35mm Carriage Bolt (20)-2 M10 x 112mm Carriage Bolt (34)-4 M10 x 88mm Button Screw (63)-1 M10 x 78mm Button Bolt (27)-2 5