Image Fitness 930 Treadmill English Manual - Page 9

Trouble, Shooting, Warning

Page 9 highlights

TROUBLE-SHOOTING Most treadmill problems can be solved by following the simple steps below. If further assistance is needed, please call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain lime (excluding holidays). 1. SYMPTOM: THE POWER DOES NOT TURN ON a. Make sure that the power cord is plugged into a properly grounded outlet. (See OPERATION AND ADJUSTMENT on page 5.) If an extension cord is needed, use only a 14-gauge generalpurpose cord of five feet or less in length. b. Make sure the safety Key is fully inserted into the console. Various indicators on the console should light. (See TURNING ON THE POWER on page 6.) c. Check the circuit breaker located on the front of the frame near the power cord. The circuit breaker is designed to protect the electrical system. If the circuit breaker has tripped, the switch will protrude as shown. To reset the circuit breaker, allow the treadmill to cool for five minutes, and then press the switch back in. Tripped Reset 2. SYMPTOM: THE POWER TURNS OFF DURING USE a. Check the circuit breaker located on the treadmill frame near the power cord. If the circuit breaker has tripped, the switch will protrude. (See the drawing above.) To reset the circuit breaker, wait for five minutes and then press the switch back in. b. Make sure the power cord is plugged in. c. Remove the safety key from the console. Reinsert the safety key fully into the console. Various indicators on the console should light. 3. SYMPTOM: THE CONSOLE DOES NOT FUNCTION PROPERLY a. If a console malfunction occurs, an error code ("PO" or NEEE") may appear on the display. If an error code appears, remove the safety key, wait for ten seconds and then reinsert the safety key. If the error code appears again, call our Customer Service Department. Do not operate the treadmill until the problem is corrected. 4. SYMPTOM: THE PULSE EARCLIP DOES NOT FUNCTION PROPERLY a. Make sure the pulse earclip is plugged fully into the jack on the console. Attach the clothes clip to your collar. b. Rub your left ear lobe and reposition the earclip. c. Try standing still while measuring your pulse. d. The pulse earclip may need to be cleaned. Press the earclip open, and wipe the two clear circles inside the earclip, using a cotton swab saturated with denatured alcohol. A WARNING: The pulse earclip Is not a medical device. Various factors, including the user's movement while exercising, may affect the accuracy of heart rate readings. The earclip is intended only as an exercise aid in determining heart rate trends in general. 9 '

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

TROUBLE
-SHOOTING
Most
treadmill
problems
can
be
solved
by
following
the
simple
steps
below.
If
further
assistance
is
needed,
please
call
our
Customer
Service
Department
toll
-free
at
1-800-999-3756,
Monday
through
Friday,
6
a.m.
until
6
p.m.
Mountain
lime
(excluding
holidays).
1.
SYMPTOM:
THE
POWER
DOES
NOT
TURN
ON
a.
Make
sure
that
the
power
cord
is
plugged
into
a
properly
grounded
outlet.
(See
OPERATION
AND
ADJUSTMENT
on
page
5.)
If
an
extension
cord
is
needed,
use
only
a
14
-gauge
general-
purpose
cord
of
five
feet
or
less
in
length.
b.
Make
sure
the
safety
Key
is
fully
inserted
into
the
console.
Various
indicators
on
the
console
should
light.
(See
TURNING
ON
THE
POWER
on
page
6.)
c.
Check
the
circuit
breaker
located
on
the
front
of
the
frame
near
the
power
cord.
The
circuit
breaker
is
designed
to
protect
the
electrical
system.
If
the
circuit
breaker
has
tripped,
the
switch
will
protrude
as
shown.
To
reset
the
circuit
breaker,
allow
the
treadmill
to
cool
for
five
minutes,
and
then
press
the
switch
back
in.
2.
SYMPTOM:
THE
POWER
TURNS
OFF
DURING
USE
Tripped
Reset
a.
Check
the
circuit
breaker
located
on
the
treadmill
frame
near
the
power
cord.
If
the
circuit
breaker
has
tripped,
the
switch
will
protrude.
(See
the
drawing
above.)
To
reset
the
circuit
breaker,
wait
for
five
minutes
and
then
press
the
switch
back
in.
b.
Make
sure
the
power
cord
is
plugged
in.
c.
Remove
the
safety
key
from
the
console.
Reinsert
the
safety
key
fully
into
the
console.
Various
indicators
on
the
console
should
light.
3.
SYMPTOM:
THE
CONSOLE
DOES
NOT
FUNCTION
PROPERLY
a.
If
a
console
malfunction
occurs,
an
error
code
("PO"
or
NEEE")
may
appear
on
the
display.
If
an
error
code
appears,
remove
the
safety
key,
wait
for
ten
seconds
and
then
reinsert
the
safety
key.
If
the
error
code
appears
again,
call
our
Customer
Service
Department.
Do
not
operate
the
treadmill
until
the
problem
is
corrected.
4.
SYMPTOM:
THE
PULSE
EARCLIP
DOES
NOT
FUNCTION
PROPERLY
a.
Make
sure
the
pulse
earclip
is
plugged
fully
into
the
jack
on
the
console.
Attach
the
clothes
clip
to
your
collar.
b.
Rub
your
left
ear
lobe
and
reposition
the
earclip.
c.
Try
standing
still
while
measuring
your
pulse.
d.
The
pulse
earclip
may
need
to
be
cleaned.
Press
the
earclip
open,
and
wipe
the
two
clear
circles
inside
the
earclip,
using
a
cotton
swab
saturated
with
denatured
alcohol.
A
WARNING:
The
pulse
earclip
Is
not
a
medical
device.
Various
factors,
including
the
user's
movement
while
exercising,
may
affect
the
accuracy
of
heart
rate
readings.
The
earclip
is
intended
only
as
an
exercise
aid
in
determining
heart
rate
trends
in
general.
9
'