Image Fitness Advanced 1400 Treadmill English Manual - Page 16
tors appear, see HOW TO USE A CUSTOM
View all Image Fitness Advanced 1400 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
7 Follow your progress with the display. See step 5 on page 11. 8 Turn on the fan if desired. See step 7 on page 12. 9 When you are finished exercising, remove the key from the console. See step 7 on page 14. HOW TO CREATE CUSTOM PROGRAMS 1 Insert the key into the console. See HOW TO TURN ON THE POWER on page 11. 2 Select one of the custom programs. To select either of the custom programs, press the Program Select button repeatedly. The word "CUSTOM" will appear in the display. Note: If the custom program has not yet been defined, only three columns of indicators will appear in the matrix in the lower part of the display. If more than three columns of indicators appear, see HOW TO USE A CUSTOM PROGRAM on page 17. 3 Press the Start button or the Speed + button and program the desired speed and incline settings. A moment after the button is pressed, the walking belt will begin to move. Hold the handrails and begin walking. Refer to the matrix. Each custom program is di- vided into one-minute segments. One speed set- ting and one incline setting can be programmed for each seg- ment. The speed set- ting for the first segment will be Current Segment shown in the flashing Current Segment column of the matrix. (The in- cline settings are not shown in the matrix.) To pro- gram a speed setting and an incline setting for the first segment, simply adjust the speed and incline of the treadmill as desired by pressing the Speed and Incline buttons. Every few times a Speed but- ton is pressed, an additional indicator will appear or disappear in the Current Segment column. When the first segment of the program ends, a series of tones will sound and the current speed setting and the current incline setting will be saved in memory. The three columns of indicators will then move one column to the left, and the speed setting for the second segment will be shown in the flashing Current Segment column. Program a speed setting and an incline setting for the second segment as described above. Continue programming speed and incline settings for as many segments as desired; custom programs can have up to forty segments. When you are finished with your workout, press the Stop button twice. The speed and incline settings that you have programmed and the number of segments that you have programmed will then be saved in memory. 4 When you are finished exercising, remove the key from the console. See step 7 on page 14. 16