Home » Image Fitness Manuals » Exercise and Fitness » Image Fitness Renew 639 » Manual Viewer

Image Fitness Renew 639 English Manual

Image Fitness Renew 639 Manual

Get Image Fitness Renew 639 PDF manuals and user guides

View all Image Fitness Renew 639 manuals

Add to My Manuals
Save this manual to your list of manuals

Image Fitness Renew 639 manual content summary:

Image Fitness Renew 639 | English Manual - Page 1
you have questions, or if there are missing parts, we will guarantee complete satisfaction through direct instructions in this manual before using this equipment. Save this manual for future reference. USERʼS MANUAL Visit our website at www.workoutwarehouse.com new products, prizes, fitness
Image Fitness Renew 639 | English Manual - Page 2
Posting the Warning Sign 2 Important Safety Instructions 3 Before You Begin 6 Choosing a Location for the Hydrotherapy Spa 7 Assembly 8 Using the Hydrotherapy Spa 10 Spa Shell Diagram 11 Using the Controls 12 Maintenance 13 Trouble-shooting 16 Part List 18 Exploded Drawing 19 Ordering
Image Fitness Renew 639 | English Manual - Page 3
you select for the spa will support this weight, plus the weight of the occupants. 6. Inspect and tighten all parts regularly. Replace any worn parts immediately. 7. DANGER-Risk of injury: Do not remove or alter the covers on the suction fittings. Never operate the hydrotherapy spa if the suction
Image Fitness Renew 639 | English Manual - Page 4
object is permanently connected to the wire connector on the electronics pack of the spa by a minimum No. 6 AWG (13.3 mm2) solid copper conductor (see instruction 21). 23. Do not operate the pump motor when the hydrotherapy spa is empty. The pump motor may be seriously damaged if it is operated
Image Fitness Renew 639 | English Manual - Page 5
DECAL PLACEMENT: Locate the decals shown below and familiarize yourself with the information on the decals. WARNING: Read all instructions before using the hydrotherapy spa. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. SAVE
Image Fitness Renew 639 | English Manual - Page 6
IMAGE® RENEW 639 hydrotherapy spa. The innovative RENEW 639 allows you to enjoy all the benefits of hydrotherapy in the comfort and privacy of your home. Hydrotherapy manual carefully before using the IMAGE® RENEW 639. If you have questions after reading the manual, please call our Customer Service
Image Fitness Renew 639 | English Manual - Page 7
spa. If you set up the hydrotherapy spa inside: If you set up the hydrotherapy spa outside: 1. The spa support the weight of the spa when it is filled with water, plus the weight of the occupants. The spa the top of the spa, provided you leave access to the motor for service. 10.Make sure to
Image Fitness Renew 639 | English Manual - Page 8
beginning assembly, carefully read the following information and instructions: • Place all parts in a cleared area and remove the packing materials from the spa shell. Do not dispose of the packing materials until assembly is completed and the spa is operating. • During assembly, make sure that all
Image Fitness Renew 639 | English Manual - Page 9
pillow 180º to change its position. 47 4. The hydrotherapy spa operates on a 240-volt power source and must be wired service it. Once the spa is filled, it will have to be drained before it can be moved. Insert a garden hose into the filter housing and fill the spa. Do not use soft water. The spa
Image Fitness Renew 639 | English Manual - Page 10
to the instructions on the inside of the electronics package for information about connecting the spa to a 240-volt power source. Once the spa is filled as it pumps. Cover the hydrotherapy spa with the spa cover. The spa cover must be tight (see SECURING THE SPA COVER ON THE SPA on this page). The
Image Fitness Renew 639 | English Manual - Page 11
The four suction fittings provide water to the pumps. Never operate the spa without the suction spa jets, turns the underwater light on and off, and adjusts the water temperature setting (see USING THE CONTROLS on page 12). I. The four air controls regulate the air flow to the whirlpool, hydrotherapy
Image Fitness Renew 639 | English Manual - Page 12
pressed once, the jets will run, providing soothing hydrotherapy. If the button is pressed again, the jets will shut off. The spa also features an automatic mode that heats and filter the water when the spa is left unattended. When the power to the spa is first turned on, or if the water temperature
Image Fitness Renew 639 | English Manual - Page 13
• Check and thoroughly clean the filter (see CHECK- ING AND CLEANING THE FILTER on this page). • Replace the filter if needed (see ORDERING REPLACEMENT PARTS on the back cover). Monthly • Clean the spa cover (see MAINTAINING THE SPA COVER on this page). • Soak the filter for two hours in a trisodium
Image Fitness Renew 639 | English Manual - Page 14
between 7.2 and 7.8, in the hydrotherapy spa. Severe problems can occur when the pH instructions with your pH test kit for additional information about testing and adjusting the pH. SANITIZING THE HYDROTHERAPY SPA the selection. As spa usage increases, the duration of the filter cycle may need
Image Fitness Renew 639 | English Manual - Page 15
hydrotherapy spa is drained, the jet pumps should also be drained if the spa will be stored for more than thirty days or if it may be exposed to freezing temperatures. The hydrotherapy spa the spa and store them in a climate-controlled room. 7. Clean the spa shell (see page 13). 8. Clean the filter
Image Fitness Renew 639 | English Manual - Page 16
be debris in the pump. Contact our customer service department. b. The pump may have a bad bearing. Contact our customer service department. 6. SYMPTOM: THE WATER DOES NOT HEAT a. Make sure that the hydrotherapy spa is fully covered with the spa cover. The spa cover must be tight for the water to
Image Fitness Renew 639 | English Manual - Page 17
is normal. If rapid water loss occurs, or if you notice wetness on the floor around the hydrotherapy spa, the spa shell may have a leak. Contact your local pool and spa service provider for repairs. 10. SYMPTOM: THE SPA JET UNIT CONTINUES TO RUN AFTER IT HAS BEEN SHUT OFF a. To turn the main jets
Image Fitness Renew 639 | English Manual - Page 18
Housing* Dual Rotary Jet Neck Jet Whirlpool Jet Corner Panel Ground Wire Key Userʼs Manual Large Warning Sign Warning Sign Light Bulb * Indicates a part that is serviceable only by service technicians. # Indicates a non-illustrated part. Specifications are subject to change without notice. 18
Image Fitness Renew 639 | English Manual - Page 19
Exploded Drawing-Model No. IMSB63920/IMSG63920) R0702A 11 3 22 21 16 5 26 18 27 28 30 30 31 24 4 31 32 51* 1 23 53 53 29 28 30 31 4 19* 30 31 13 13 13 10* 13 48 45 6 48 45 6 49 34 14* 9 47 9 9 34 49 18 39 40 41 42 46 2 25 46 33 46 46 17 37 43 41 15 44 36 54 35
Image Fitness Renew 639 | English Manual - Page 20
The NAME of the product (IMAGE® RENEW 639 hydrotherapy spa) • The SERIAL NUMBER of the product (see the front cover of this manual) • The KEY NUMBER and DESCRIPTION of the desired part(s) (see the PART LIST and EXPLODED DRAWING on pages 18 and 19) Limited Warranty ICON Health & Fitness, Inc. (ICON