Insignia NS-50D400NA14 Important Information (English) - Page 5

NS-46D400NA14/NS-50D400NA14 General Problem Solution No power • Make sure that the power cord is correctly connected to your TV and a power outlet. • Unplug the power cord, wait 60 seconds, then plug the cord back in and turn on your TV. • Other devices (for example, a surround sound receiver, external speakers, fans, or hair dryers) may be interfering with your TV. Try turning off one device at a time to determine which device is causing interference. After you have determined which device is causing interference, move it further from the TV to eliminate the interference. "No signal" error message is displayed • Press INPUT and make sure that you have selected the correct input for the device or service you are trying to use. • If you are using a cable or satellite box, use the remote that came with that box to change channels. • Make sure that you have the correct input selected to view channels from the cable or satellite box. After Auto Channel Search, there are no channels • Reception can vary by channel depending on the broadcast power level of a given station. Contact your cable or satellite TV provider. • Make sure that the antenna or cable/satellite TV is connected securely to your TV. • Try replacing the cable between the antenna/cable or cable/satellite box and your TV. One or more channels do not display • • • • • Make sure that the channels are not blocked. See "Setting parental control levels" in the online User Guide. Make sure that the channels are not hidden. The channel may have been deleted from the channel list. You can tune to the channel by pressing the number buttons or you can add the channel back to the channel list. See "Hiding channels" in the online User Guide. If you are using a cable or satellite box, use the remote that came with that box to change channels. Make sure that you have the correct input selected to view channels from the cable or satellite box. If you are using an antenna, the digital channel signal may be low. To check the digital channel signal strength, see "Checking the digital signal strength" in the online User Guide. Password is lost • Enter 9999 to access parental controls, then set a new password. See "Setting or changing the password" in the online User Guide. Some settings cannot be accessed • If a setting is grayed, the setting is not available in the current video input mode. Control buttons do not work • Make sure that the Button Lock option is set to Off. See "Locking control buttons" in the online User Guide. • Unplug the power cord, wait a few seconds, then plug the cord back in and turn on your TV. Notes • If the problem is not solved by using these troubleshooting instructions, turn off your TV, then turn it on again. • Additional troubleshooting information is in your online User Guide. Go to www.insigniaproducts.com, then click Support & Service. Enter your model number in the box under Manual, Firmware, Drivers & Product Information, then click X. Specifications Specifications are subject to change without notice. Dimensions and weight Without stand With stand Screen NS-46D400NA14 NS-50D400NA14 41.24 × 24.66 × 3.98 in. (104.76 × 62.64 × 10.1 cm) 23.36 lbs. (10.6 kg) 43.95 × 25.95 × 3.98 in. (111.64 × 65.91 × 10.1 cm) 29.5 lbs. (13.38 kg) 41.24 × 26.08 × 9.47 in. 43.95 × 27.52 × 9.47 in. (104.76 × 66.25 × 24.06 cm) (111.64 × 69.90 × 24.06 cm) 26.01 lbs. (11.8 kg) 31.96 lbs. (14.5 kg) Screen size measured diagonally Display type Panel 60 Hz vs.120 Hz Display resolution Panel resolution Aspect ratio Contrast ratio (typical)-panel Dynamic contrast ratio- list value TV Brightness (minimum) cd/m2 Comb filter Response time Horizontal viewing angle Vertical viewing angle NS-46D400NA14 46 in. LED 60Hz 1080p 1920 (H) × 1080 (V) 16:9 3000:1 160,000:1 240 nits 3d y/c digital 6.5 ms 178° 178° NS-50D400NA14 49.5 in. LED 60Hz 1080p 1920 (H) × 1080 (V) 16:9 3000:1 200,000:1 240 nits 3d y/c digital 6.5 ms 178° 178° Display resolutions (both models) HDMI suggested resolutions Component video suggested resolutions 1080p, 1080i, 720p, 480p, 480i 1080i, 720p, 480p, 480i Tuner (both models) Analog Digital NTSC ATSC, 8-VSB, Clear-QAM Inputs (both models) HDMI Component video Composite video Shared audio (component and composite) S-Video PC/VGA 3.5mm PC audio input 3 (side) E-EDID compliant HDCP compliant MHL-enabled (HDMI 2/MHL jack) 1 (back) 1 (back) Shared with component Y Yes No 1 (back) 1 (back) www.insigniaproducts.com 5