Insignia NS-BT400 User Manual (English) - Page 11
To pair your speaker with a computer with a Bluetooth USB, adapter - software
UPC - 600603114908
View all Insignia NS-BT400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Insignia NS-BT400 5 Enter the default PIN of "0000." Your computer and the speaker system are now connected through Bluetooth wireless technology. 6 Select music on your computer to play wirelessly through your NS-BT400 speaker system. To pair your speaker with a computer with a Bluetooth USB adapter: 1 Plug the Bluetooth USB adapter into a USB port on your computer and install the Bluetooth software provided (if required). 2 Start the Bluetooth application on your computer, then perform a search for Bluetooth devices in range. 3 Turn on your speaker, then press and hold the PAIRING button for three seconds, until the Pairing LED flashes blue three times. 4 Release the button. The Pairing LED alternately flashes blue and red for 90 seconds, indicating that the speaker and your computer are in pairing mode. Note If the pairing process cannot be completed within 90 seconds, the blue and red LED stops flashing and the Bluetooth function is terminated automatically. If this happens, you must initiate the pairing process again. Your computer should now display a new device named "NS-BTS21" on the Bluetooth Device List. 5 Select "NS-BTS21" from the Bluetooth Device List. You are prompted to enter a PIN. 6 Enter the default passkey of "0000." Your computer and speaker are now connected through Bluetooth wireless technology. 7 Select music on your computer to play wirelessly through your speaker. www.insignia-products.com 9