Insignia NS50D40SNA14 User Manual (English) - Page 22

NS-50D40SNA14 Insignia 50" LED TV Using DVI (same as HDMI but requires an audio connection) Note You must use the HDMI 2/DVI jack to connect a DVD or Blu-ray player using DVI. If you use another HDMI jack, you will not hear sound from the TV speakers. On your TV HDMI cable with HDMI-DVI adapter Side of TV HDMI cable connector 3.5mm audio cable connector DVD or Blu-ray player HDMI 2/DVI DVI AUDIO jack IN jack Back of TV 3.5mm audio cable To connect a DVD or Blu-ray player using DVI: 1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off. 2 Connect an HDMI-DVI adapter (not provided) to one end of an HDMI cable (not provided), then connect the adapter to the DVI OUT jack on the DVD or Blu-ray player. 3 Connect the other end of the cable to the HDMI 2/DVI jack on the side of your TV. 4 Connect a 3.5mm audio cable (not provided) to the DVI AUDIO IN jack on the back of your TV and to the AUDIO OUT jacks on the DVD or Blu-ray player. Note When you connect the audio using the DVI AUDIO IN jack, the audio output is analog. 5 Plug your TV's power cord into a power outlet, then turn on your TV. 6 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the documentation that came with the player. 7 Press INPUT to open the INPUT SOURCE list. 8 Press S or T to select HDMI2, then press ENTER. 18 www.insigniaproducts.com