Insignia NSAV511 Quick Setup Guide (English) - Page 1

Congratulations on your purchase of a high-quality Insignia product. Your NS-AV511 represents the state of the art in home theater system design and is designed for reliable and trouble-free performance. Package contents • Receiver • Remote control • AA batteries (2) • FM antenna • AM antenna • User Guide • Quick Setup Guide Back view features ITEM DESCRIPTION FUNCTION 1 DIGITAL IN jacks Plug the optical digital cable from a game (1) or TV/CD (2) into the upper jacks, or the coaxial digital cable from a BD/DVD into the lower jack. 2 HDMI jacks Plug the HDMI signal input cable from a GAME (IN4), CBL/SAT (IN3), VCR/DVR (IN2), BD/DVD (IN1). Plug the HDMI output signal cable to a TV or monitor into the OUT jack. 3 ANTENNA connectors Connect a 75 ohm FM antenna to the coaxial connector or an AM loop antenna to the wire connectors. 4 FRONT SPEAKERS SURROUND SPEAKERS CENTER SPEAKER Connect the front speakers to these jacks. Connect the left and right surround speakers and the center speaker to these connectors. If you use the RF-RBCARD to connect your surround speakers, do not connect them here. 5 AC power cord Plug this cord into an AC power outlet. 6 COMPONENT video jacks Plug the cables from a component video source into the #1 (BD/DVD) or #2 (CBL/SAT) jacks. Plug the cables to a component video monitor into the OUT jacks. The jacks are color coded (red, green, and blue) to correspond to the cable connectors. 7 Composite Video and Plug the composite video and audio L/R output Audio L/R jacks cables from the indicated devices into these jacks. For video recording, plug the composite video and audio L/R input cables to a VCR or DVR into the OUT jacks 8 MONITOR OUT V (Video) Connect this jack to a TV monitor. 9 SUBWOOFER Connect the subwoofer to this jack. Actual product may vary from image shown. Features Front controls Fluorescent display Back view Quick Setup Guide NS-AV511 5.1 Surround Sound Receiver Front controls features ITEM DESCRIPTION FUNCTION 1 ON/STANDBY button Press to turn on your stereo receiver. 2 HDMI THRU indicator Lights when the HDMI pass-through function is activated in standby mode. 3 STANDBY indicator Lights red when your stereo receiver is in standby mode. 4 Remote control sensor Receives the signal from the remote control. 5 Display Provides information about receiver functions and settings. 6 SETUP button Press to open the on-screen menus. 7 TUNING  /  PRESET  /  ENTER Press TUNING  /  to tune the radio to the next or previous station Press PRESET  /  to tune the radio to the next or previous station preset. Press ENTER to con rm a selection. 8 RETURN button In menu mode, press to return to the main menu. 9 MEMORY button Press to save a radio station preset. Press with the TUNING MODE button to clear presets. 10 TUNING MODE button Press to turn on the receiver tuning mode and listen to the radio. Press with the MEMORY button to clear presets. 11 MASTER VOLUME knob Turn to increase or decrease the volume. 12 Headphone jack Plug your headphones into this jack. 13 Input selector buttons Press to select the input signal source you want. 14 Protective cap Remove when using jack. 15 AUX INPUT VIDEO jack Plug an external video source into this jack. 16 AUX INPUT AUDIO L/R jacks Plug an external sound source into this jack. 17 HOME button Press to access audio settings. Fluorescent display features ITEM DESCRIPTION 1 Audio input indicator 2 Listening mode indicator 3 Tuning indicators 4 SLEEP indicator ITEM DESCRIPTION 5 MUTING indicator 6 DIGITAL display Installing batteries in the remote control 1 Remove the cover. 2 Insert two AA batteries into the compartment matching the polarity indicated. 3 Replace the cover. CAUTION: Do not use Ni-Cd rechargeable batteries in this remote control. Remove the batteries if they are not to be used for an extended period of time. Batteries (AA)