Intel BLKDH67BL Product Guide - Page 42
Removing a PCI Express x16 Graphics Card,
View all Intel BLKDH67BL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Intel Desktop Board DH67BL Product Guide Removing a PCI Express x16 Graphics Card Follow these instructions to remove a PCI Express x16 graphics card from a connector: 1. Observe the precautions in "Before You Begin" on page 27. 2. Disconnect the monitor cable from the graphics card back panel connector. 3. Remove the screw (Figure 18, A) that secures the card's metal bracket to the chassis back panel. 4. Push the card ejector lever down using the tip of a pencil or similar tool (Figure 18, B) in the notch. This will release the card from the connector (C). 5. Pull the card straight up to remove it. Figure 18. Removing a PCI Express x16 Graphics Card 42
Intel Desktop Board DH67BL Product Guide
42
Removing a PCI Express x16 Graphics Card
Follow these instructions to remove a PCI Express x16 graphics card from a connector:
1.
Observe the precautions in "Before You Begin" on page 27.
2.
Disconnect the monitor cable from the graphics card back panel connector.
3.
Remove the screw (Figure 18, A) that secures the card’s metal bracket to the
chassis back panel.
4.
Push the card ejector lever down using the tip of a pencil or similar tool
(Figure 18, B) in the notch.
This will release the card from the connector (C).
5.
Pull the card straight up to remove it.
Figure 18.
Removing a PCI Express x16 Graphics Card