Intel D845GLVA Product Specification - Page 56
INTEGRATOR'S NOTE, 8.3.2, Auxiliary Front Panel Power/Sleep/Message-Waiting LED Connector
View all Intel D845GLVA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Intel Desktop Board D845GLVA Technical Product Specification Table 31. States for a One-Color Power LED LED State Description Off Steady Green Blinking Green Power off/sleeping Running Running/message waiting Table 32. States for a Two-Color Power LED LED State Off Steady Green Blinking Green Steady Yellow Blinking Yellow Description Power off Running Running/message waiting Sleeping Sleeping/message waiting INTEGRATOR'S NOTE To use the message waiting function, ACPI must be enabled in the operating system and a message-capturing application must be invoked. 2.8.3.1.4 Power Switch Connector Pins 6 and 8 can be connected to a front panel momentary-contact power switch. The switch must pull the SW_ON# pin to ground for at least 50 ms to signal the power supply to switch on or off. (The time requirement is due to internal debounce circuitry on the Desktop Board D845GLVA.) At least two seconds must pass before the power supply will recognize another on/off signal. 2.8.3.2 Auxiliary Front Panel Power/Sleep/Message-Waiting LED Connector Pins 1 and 3 of this connector duplicate the signals on pins 2 and 4 of the front panel connector. Table 33 lists the signal names of the Auxiliary Front Panel Power/Sleep/Message-Waiting LED Connector. Table 33. Auxiliary Front Panel Power/Sleep/Message-Waiting LED Connector Pin Signal Name 1 HDR_BLNK_GRN 2 Not connected 3 HDR_BLNK_YEL In/Out Out Out Description Front panel green LED Front panel yellow LED 56