Intel D845GRG Intel Desktop Boards D845RG/D845BV Product Guide English - Page 26
Installing and Removing Memory, Installing DIMMs - d845grg2
View all Intel D845GRG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Intel Desktop Boards D845GRG and D845GBV Product Guide Installing and Removing Memory CAUTION To be fully compliant with all applicable Intel SDRAM memory specifications, the boards require DIMMs that support the Serial Presence Detect (SPD) data structure. You can access the PC Serial Presence Detect Specification at: http://www.intel.com/technology/memory/pcsdram/spec/ Desktop Boards D845GRG2 and D845GBV have two 184-pin DIMM sockets arranged as banks 0 and 1, as shown in Figure 8. If installing a single DIMM, install it in bank 0. Refer to the Main Memory heading on page 12 for memory requirements. Installing DIMMs CAUTION Install memory in the DIMM sockets prior to installing the AGP video card to avoid interference with the memory retention mechanism. To install DIMMs, follow these steps: 1. Observe the precautions in "Before You Begin" on page 21. 2. Turn off all peripheral devices connected to the computer. Turn off the computer and disconnect the AC power cord. 3. Remove the computer's cover and locate the DIMM sockets (see Figure 8). 4. Remove the AGP video card if it interferes with the DIMM clips from being easily opened and closed. Figure 8. Installing a Memory Module 0 1 OM13600 26