Intel D850EMV2 Product Specification - Page 44
LAN Wake Capabilities, CAUTION, 14.2.4, Instantly Available Technology
View all Intel D850EMV2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Intel Desktop Board D850EMD2/D850EMV2 Technical Product Specification 1.14.2.3 LAN Wake Capabilities CAUTION For LAN wake capabilities, the +5 V standby line for the power supply must be capable of providing adequate +5 V standby current. Failure to provide adequate standby current when implementing LAN wake capabilities can damage the power supply. Refer to Section 2.11.3 on page 80 for additional information. LAN wake capabilities enable remote wake-up of the computer through a network. The LAN subsystem PCI bus network adapter monitors network traffic at the MII. Upon detecting a Magic Packet† frame, the LAN subsystem asserts a wake-up signal that powers up the computer. Depending on the LAN implementation, the desktop boards D850EMD2/D850EMV2 support LAN wake capabilities in the following ways, which are with ACPI only: • Through the PCI bus PME# signal for PCI 2.2-compliant LAN designs • Through the onboard LAN subsystem • Through a CNR-based LAN subsystem 1.14.2.4 Instantly Available Technology CAUTION For Instantly Available technology, the +5 V standby line for the power supply must be capable of providing adequate +5 V standby current. Failure to provide adequate standby current when implementing Instantly Available technology can damage the power supply. Refer to Section 2.11.3 on page 80 for additional information. Instantly Available technology enables the desktop boards D850EMD2/D850EMV2 to enter the ACPI S3 (Suspend to RAM) sleep state. While in the S3 sleep state, the computer will appear to be off; the power supply fan is off, and the front panel LED is amber if dual colored or off if single colored. When signaled by a wake-up device or event, the system quickly returns to its last known wake state. Table 12 on page 41 lists the devices and events that can wake the computer from the S3 state. The desktop boards D850EMD2/D850EMV2 support the PCI Bus Power Management Interface Specification. For information on the versions of this specification, see Section 1.5. Add-in boards that also support this specification can participate in power management and can be used to wake the computer. The use of Instantly Available technology requires operating system support and PCI 2.2-compliant add-in cards and drivers. 44