Intel D865GBF Product Guide - Page 46
Setting the BIOS Configuration Jumper Block - bios update
View all Intel D865GBF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Intel Desktop Boards D865GBF/D865GLC Product Guide Setting the BIOS Configuration Jumper Block CAUTION Always turn off the power and unplug the power cord from the computer before changing the jumper. Moving the jumper with the power on may result in unreliable computer operation. The location of the desktop board's BIOS configuration jumper is shown in Figure 16. 13 J9J4 OM15233 Figure 16. Location of the BIOS Configuration Jumper Block The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup. Table 11 shows the jumper settings for the Setup program modes. Table 11. Jumper Settings for the BIOS Setup Program Modes (J9J4) Jumper Setting 1 3 Mode Normal (default) (1-2) Description The BIOS uses the current configuration and passwords for booting. 1 3 Configure (2-3) After the Power-On Self-Test (POST) runs, the BIOS displays the Maintenance Menu. Use this menu to clear passwords. 1 3 Recovery (None) The BIOS recovers data from a recovery diskette in the event of a failed BIOS update. 46