Intel D865PERL Intel Desktop Board D865PERL Product Guide - Page 43
low disk usage, The default selection is 64 KB.
View all Intel D865PERL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Installing and Replacing Desktop Board Components 6. Enter the name of the RAID volume and the stripe size. The default name for the RAID Volume is RAID_Volume1. Select the stripe value for the RAID 0 array. The available values range from 8 KB to 128 KB in 8 KB increments. The stripe value should be chosen based on the planned drive usage. Some suggested selections are listed below. The default selection is 64 KB. • 16 KB - low disk usage • 64 KB - typical disk usage • 128 KB - performance disk usage 7. Press the "Next" button to continue. 8. Confirm creation of the RAID volume by pressing the "Yes" button. 43
Installing and Replacing Desktop Board Components
43
6.
Enter the name of the RAID volume and the stripe size.
The default name for the RAID Volume is RAID_Volume1.
Select the stripe value for the
RAID 0 array.
The available values range from 8 KB to 128 KB in 8 KB increments.
The
stripe value should be chosen based on the planned drive usage.
Some suggested selections are
listed below.
The default selection is 64 KB.
•
16 KB
–
low disk usage
•
64 KB
–
typical disk usage
•
128 KB
–
performance disk usage
7. Press the
“
Next
”
button to continue.
8.
Confirm creation of the RAID volume by pressing the
“
Yes
”
button.