Intel D915GAG Intel Desktop Board D915GAG Specification Update - Page 12

Intel® Desktop Board D915GAG Specification Update ERRATA 1. Wake On LAN May Not Function After Loss and Restore of AC Power PROBLEM: If AC power is removed, Wake On LAN may not function until the LAN circuit is re- initialized. The sequence of events is as follows: • AC power removed (AC power cord disconnected, for example) • AC power restored. +5V Standby voltage is re-applied to the board • Wake On LAN may not be functional • Switch power on • Switch power off to put system back into Standby mode (S5 state) • Wake On LAN functionality restored IMPLICATION: Wake on LAN will not function if AC power is interrupted. WORKAROUND: In the BIOS Setup program, set After Power Failure to "Power On" in the Power Menu. STATUS: This erratum may be fixed in a future BIOS revision. 2. The placement of capacitors behind the PCI Express* x1 connector slot may prohibit some PCI Express x1 add-in cards from properly connecting to the motherboard. PROBLEM: Due to the design and placement of the audio circuitry on this motherboard, it was necessary to position capacitors in the keep-out zone behind the PCI Express* x1 connector slot. IMPLICATION: Some PCI Express x1 add-in cards may not fully connect to the PCI Express x1 connector slot, due to interference between capacitors in the keep-out zone and I/O connectors on the add-in card that are located on the I/O bracket, in line with the edge fingers on the card. WORKAROUND: None STATUS: MAY BE FIXED IN A LATER HARDWARE REVISION. 6