Intel D945GBO English Product Guide - Page 45
Setting the BIOS Configuration Jumper Block
View all Intel D945GBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Installing and Replacing Desktop Board Components Setting the BIOS Configuration Jumper Block NOTE Always turn off the power and unplug the power cord from the computer before changing the jumper. Moving the jumper with the power on may result in unreliable computer operation. Figure 24 shows the location of the desktop board's BIOS configuration jumper. 1 2 3 OM18092 Figure 24. Location of the BIOS Configuration Jumper The three-pin BIOS jumper enables all board configurations to be done in BIOS Setup. Table 11 shows the jumper settings for the Setup program modes. Table 11. Jumper Settings for the BIOS Setup Program Modes Jumper Setting 1 Mode Normal (default) (1-2) Description The BIOS uses the current configuration and passwords for booting. 3 Configure (2-3) After the Power-On Self-Test (POST) runs, the BIOS 1 displays the Maintenance Menu. Use this menu to clear passwords. 3 Recovery (None) The BIOS recovers data from a recovery diskette in the 1 event of a failed BIOS update. 3 45