Intel D945PLNM English Product Guide - Page 16

LAN Subsystem - lan driver

Get Intel D945PLNM PDF manuals and user guides View all Intel D945PLNM manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Intel Desktop Board D945PLNM Product Guide LAN Subsystem The LAN subsystem, with Intel 82801GB (ICH7) provides the following functions: • 10/100 Ethernet LAN controller (Intel® 82562) • Support for RJ-45 connector with status indicator LEDs • Programmable transit threshold • Configurable EEPROM that contains the MAC address LAN Subsystem Software For LAN software and drivers, refer to the D945PLNM link on Intel's World Wide Web site at: http://support.intel.com/support/motherboards/desktop RJ-45 LAN Connector LEDs Two LEDs are built into the RJ-45 LAN connector located on the back panel (see Figure 2). AB OM19073 Figure 2. LAN Connector LEDs Table 5 describes the LED states when the board is powered up and the 10/100 Ethernet LAN subsystem is operating. Table 5. LAN Connector LEDs LED Color Green (A) Yellow (B) LED State Off On Blinking Off On (steady state) Indicates LAN link is not established LAN link is established LAN activity is occurring 10 Mb/s data rate 100 Mb/s data rate 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
Intel Desktop Board D945PLNM Product Guide
16
LAN Subsystem
The LAN subsystem, with Intel 82801GB (ICH7) provides the following functions:
•
10/100 Ethernet LAN controller (Intel
®
82562)
•
Support for RJ-45 connector with status indicator LEDs
•
Programmable transit threshold
•
Configurable EEPROM that contains the MAC address
LAN Subsystem Software
For LAN software and drivers, refer to the D945PLNM link on Intel’s World Wide Web site at:
RJ-45 LAN Connector LEDs
Two LEDs are built into the RJ-45 LAN connector located on the back panel (see Figure 2).
OM19073
A
B
Figure 2.
LAN Connector LEDs
Table 5 describes the LED states when the board is powered up and the 10/100 Ethernet LAN
subsystem is operating.
Table 5.
LAN Connector LEDs
LED Color
LED State
Indicates
Off
LAN link is not established
Green (A)
On
LAN link is established
Blinking
LAN activity is occurring
Off
10 Mb/s data rate
Yellow (B)
On (steady state)
100 Mb/s data rate