Intel DG41AN Product Specification - Page 15

Product Description # INTEGRATOR'S NOTE Use only ATX12V-compliant power supplies. For information about Power supply connectors Refer to Section 2.2.2.4, page 46 1.5 System Memory The board has two DIMM sockets and supports the following memory features: • 1.5 V DDR3 SDRAM DIMMs with gold plated contacts, with the option to raise the voltage to support higher performance DDR3 SDRAM DIMMs • Dual channel interleaved mode support • Unbuffered, single-sided or double-sided DIMMs with the following restriction: Double-sided DIMMs with x16 organization are not supported. • 4 GB maximum total system memory (with two 2 GB DIMMs). Refer to Section 2.1.1 on page 37 for information on the total amount of addressable memory. • Minimum total system memory: 512 MB • Non-ECC DIMMs • Serial Presence Detect • DDR3 800 MHz, DDR3 1066 MHz, and DDR3 1333 (overclocking required) MHz SDRAM DIMMs Note: DDR3-1333 memory operates at 1066 MHz by default until manually overclocked through the system BIOS. CAUTION Altering PC memory frequency, voltage and/or latency may: (i) reduce system stability and useful life of the system, memory and processor; (ii) cause the processor and other system components to fail; (iii) cause reductions in system performance; (iv) cause additional heat or other damage; and (v) affect system data integrity. Intel has not tested, and does not warranty, the operation of the memory beyond its specifications. Intel assumes no responsibility that the memory, including if used with altered clock frequencies and/or voltages, will be fit for any particular purpose. Check with the memory manufacturer for warranty and additional details. 15