Intel DG41TX English Product Guide - Page 61
Removing the Battery
View all Intel DG41TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Installing and Replacing Desktop Board Components To replace the battery, follow these steps: 1. Observe the precautions in "Before You Begin" (see page 29). 2. Turn off all peripheral devices connected to the computer. Disconnect the computer's power cord from the AC power source (wall outlet or power adapter). 3. Remove the computer cover. 4. Locate the battery on the board (see Figure 26). 5. Gently lift the battery retention clip away from the battery holder as shown in Figure 26. The battery will "pop" out of the holder and you can then remove the battery. Note the orientation of the "+" and "-" on the battery. 6. Install the new battery in the connector, orienting the "+" and "-" correctly. 7. Replace the computer cover. Figure 26. Removing the Battery 61