Intel DQ57TM Product Specification

Intel DQ57TM Manual

Get Intel DQ57TM PDF manuals and user guides View all Intel DQ57TM manuals
Add to My Manuals
Save this manual to your list of manuals

Intel DQ57TM manual content summary:

  • Intel DQ57TM | Product Specification - Page 1
    January 2010 Order Number: E83547-001US The Intel® Desktop Board DQ57TM may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel Desktop Board DQ57TM Specification Update.
  • Intel DQ57TM | Product Specification - Page 2
    Board DQ57TM Technical Product Specification Date January 2010 This product specification applies to only the standard Intel® Desktop Board DQ57TM with BIOS identifier TMIBX10H.86A. Changes to this specification will be published in the Intel Desktop Board DQ57TM Specification Update before
  • Intel DQ57TM | Product Specification - Page 3
    of the hardware used on the Intel Desktop Board DQ57TM A map of the resources of the Intel Desktop Board The features supported by the BIOS Setup program A description of the BIOS error messages, beep codes, and POST codes Regulatory compliance and battery disposal information Typographical
  • Intel DQ57TM | Product Specification - Page 4
    Intel Desktop Board DQ57TM Technical Product Specification Other Common Notation # GB GB/s Gb/s KB Kbit kbits/s MB MB/s Mbit Mbits/s xxh x.x V * Used after a signal name to identify an active-low signal (such
  • Intel DQ57TM | Product Specification - Page 5
    1.4 Processor 14 1.5 Intel® Q57 Express Chipset 15 1.6 System Memory 15 1.6.1 Memory Configurations 16 1.7 Graphics Subsystem 18 1.7.1 Integrated Graphics 18 1.7.2 PCI Express x16 Graphics 19 1.8 USB 19 1.9 SATA Interfaces 20 1.10 Legacy I/O Controller 21 1.10.1 Serial Port 21 1.11 Audio
  • Intel DQ57TM | Product Specification - Page 6
    2.6.1 Power Supply Considerations 60 2.6.2 Fan Header Current Capability 61 2.6.3 Add-in Board Considerations 61 2.7 Thermal Considerations 62 2.8 Reliability 64 2.9 Environmental 64 3 Overview of BIOS Features 3.1 Introduction 65 3.2 System Management BIOS (SMBIOS 67 3.3 Legacy USB Support
  • Intel DQ57TM | Product Specification - Page 7
    System Power 35 8. Wake-up Devices and Events 36 9. System Memory Map 45 10. Component-side Connectors and Headers Shown in Figure 11 48 11. Serial Port Header 49 12. S/PDIF Header 49 13. Internal Mono Speaker Header 49 14. Front Panel Audio Header for Intel HD Audio 49 15. Front Panel Audio
  • Intel DQ57TM | Product Specification - Page 8
    Intel Desktop Board DQ57TM Technical Product Specification 27. BIOS Setup Configuration Jumper Settings 57 28. Clear CMOS 58 29. Recommended Power Supply Current Values 60 30. Fan Header Current Capability 61 31. Thermal Considerations for Components 63 32. Environmental Specifications 64 33.
  • Intel DQ57TM | Product Specification - Page 9
    graphics support for PCI Express 2.0 x16 add-in graphics card • Intel® High Definition Audio: ― Realtek* ALC662 audio codec ― S/PDIF audio header ― DisplayPort Digital Audio • Fourteen USB 2.0 ports: ― Six ports are implemented with stacked back panel connectors ― Eight front panel ports are
  • Intel DQ57TM | Product Specification - Page 10
    • Support for PCI* Local Bus Specification Revision 2.2 PC Technology • Support for PCI Express* • Suspend to RAM support • Wake on PCI, PCI Express, LAN, front panel, serial, and USB ports LAN Support Gigabit (10/100/1000 Mbits/s) LAN subsystem using the Intel® 82578DM Gigabit Ethernet
  • Intel DQ57TM | Product Specification - Page 11
    Product Description 1.1.2 Board Layout Figure 1 shows the location of the major components on Intel Desktop Board DQ57TM. Figure 1. Major Board Components Table 2 lists the components identified in Figure 1. 11
  • Intel DQ57TM | Product Specification - Page 12
    Alternate front panel power LED header S Front panel header T Standby power LED U Intel ME "M" state LED V Front panel USB headers (4) W Intel Q57 Express Chipset X BIOS setup configuration jumper block Y Clear CMOS header Z Intel Remote PC Assist header AA Serial port header BB
  • Intel DQ57TM | Product Specification - Page 13
    Product Description 1.1.3 Block Diagram Figure 2 is a block diagram of the major functional areas of the board. Figure 2. Block Diagram 13
  • Intel DQ57TM | Product Specification - Page 14
    ... Intel Desktop Board DQ57TM Desktop Board Support Available configurations for the Intel Desktop Board DQ57TM Supported processors Chipset information BIOS and driver updates Tested memory Integration information Visit this World Wide Web site: http://www.intel.com/products/motherboard/DQ57TM
  • Intel DQ57TM | Product Specification - Page 15
    memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS
  • Intel DQ57TM | Product Specification - Page 16
    Desktop Board DQ57TM Technical Product Specification For information about... Tested Memory Refer to: http://www.intel.com/support/motherboards/desktop/sb/CS025414.htm 1.6.1 Memory Configurations The Intel Core i7, Intel Core i5, Intel Core i3, Intel Pentium processors, and Intel Xeon processors
  • Intel DQ57TM | Product Specification - Page 17
    Figure 3 illustrates the memory channel and DIMM configuration. Figure 3. Memory Channel and DIMM Configuration NOTE When using a processor without Intel Graphics Technology, there must always be memory installed into any or both of the DIMM 0 (blue) memory sockets for the system to boot. 17
  • Intel DQ57TM | Product Specification - Page 18
    Intel Desktop Board DQ57TM Technical Product Specification 1.7 Graphics Subsystem The board supports system graphics through either Intel Graphics Technology or a PCI Express 2.0 x16 add-in graphics card. 1.7.1 Integrated Graphics The board supports integrated graphics through the Intel® Flexible
  • Intel DQ57TM | Product Specification - Page 19
    1.8 USB The board supports up to fourteen USB 2.0 ports through two EHCI host controllers on the PCH that allow the use of EHCI-compatible drivers. The port arrangement is as follows: • Six ports are implemented with stacked back panel connectors • Eight front panel ports are implemented through
  • Intel DQ57TM | Product Specification - Page 20
    the Windows* XP, Windows Vista*, and Windows 7* operating systems. For more information, see: http://www.serialata.org/. For information about The location of the SATA connectors Refer to Figure 11, page 47 1.9.1.1 Serial ATA RAID The board supports the Intel Rapid Storage Technology (Intel RST
  • Intel DQ57TM | Product Specification - Page 21
    Port The serial port is implemented as a 10-pin header on the board. The serial port supports data transfers at speeds up to 115.2 kbits/s with BIOS support. For information about The location of the serial port header Refer to Figure 11, page 47 1.11 Audio Subsystem The board supports Intel High
  • Intel DQ57TM | Product Specification - Page 22
    Intel Desktop Board DQ57TM Technical Product Specification 1.11.2 Audio Headers and Connectors The board contains audio connectors and headers on both the back panel and the component side of the board. The component-side audio headers include the following: • Front panel audio (a 2 x 5-pin header
  • Intel DQ57TM | Product Specification - Page 23
    integrated status LEDs For information about LAN software and drivers Refer to http://downloadcenter.intel.com 1.12.1 Intel® 82578DM Gigabit Ethernet Controller The Intel 82578DM Gigabit Ethernet Controller supports the following features: • 10/100/1000 BASE-T IEEE 802.3 compliant • PCI Express
  • Intel DQ57TM | Product Specification - Page 24
    Intel Desktop Board DQ57TM Technical Product Specification 1.12.3 RJ-45 LAN Connector with Integrated LEDs Two LEDs are built into the RJ-45 LAN connector (shown in Figure 5). Item A B Description Link/Activity LED (green) Link Speed LED (green/yellow) Figure 5. LAN Connector LED Locations Table
  • Intel DQ57TM | Product Specification - Page 25
    at 25 ºC with power applied through the power supply 5V STBY rail. NOTE If the battery and AC power fail date and time values will be reset and the user will be notified during POST. When the voltage drops below a certain level, the BIOS Setup program settings stored in CMOS RAM (for example, the
  • Intel DQ57TM | Product Specification - Page 26
    Intel Desktop Board DQ57TM Technical Product Specification 1.14 Thermal Monitoring Figure 6 shows the locations of the thermal sensors and fan headers. Item A B C D Description Rear chassis fan header Thermal diode, located on processor die Processor fan header Front chassis fan header Figure 6.
  • Intel DQ57TM | Product Specification - Page 27
    monitoring and fan control include: • Intel Quiet System Technology, delivering acoustically-optimized thermal management • Thermal sensors in the processor and PCH, as well as near the CPU voltage regulators and system memory • Monitoring of five system voltages (+5 V, +12 V, +3.3 V, Memory V-SM
  • Intel DQ57TM | Product Specification - Page 28
    system or the power state of the system. The Intel Active Management Technology subsystem consists of: • Intel ME microcontroller embedded in the Intel Q57 PCH • Intel 82578DM Gigabit (10/100/1000 Mbits/s) Ethernet LAN controller • BIOS/SPI Flash (64 Mbits) • On-board Intel ME "M" state status LED
  • Intel DQ57TM | Product Specification - Page 29
    Product Description • Remote troubleshooting and recovery that can significantly reduce desk-side visits and potentially increasing efficiency of IT technical staff. ⎯ System event log ⎯ IDE Redirection (IDE-R) or PXE boot: remote CD or network drive boot ⎯ Serial over LAN ⎯ OOB diagnostics ⎯ Remote
  • Intel DQ57TM | Product Specification - Page 30
    Drivers Intel AMT software and drivers are available from Intel's World Wide Web site. The package usually consists of the following components: • Intel® Management Engine Interface (Intel® ME Interface) • Serial Over LAN (SOL) driver • Local Manageability Service (LMS) • User Notification Service
  • Intel DQ57TM | Product Specification - Page 31
    virtualization" required by some operating systems for backward compatibility, such as Windows XP Mode for Windows 7. NOTE Requires an Intel processor that supports Intel VT. 1.15.2.3 Intel® Trusted Execution Technology (Intel® TXT) Intel Trusted Execution Technology (Intel TXT) helps protect the
  • Intel DQ57TM | Product Specification - Page 32
    These include Serial-over-LAN, IDE Redirection, KVM Redirection and PC Alarm Clock. NOTE Intel Remote PC Assist Technology requires a vPro technology-enabled computer that has an Intel Remote PC Assist Technology-enabled BIOS, a connection with a power source and the Internet. This service operates
  • Intel DQ57TM | Product Specification - Page 33
    Advanced Configuration and Power Interface (ACPI) • Hardware support: ⎯ Power connector ⎯ Fan headers ⎯ LAN wake capabilities ⎯ Instantly Available PC technology ⎯ Wake from USB ⎯ Power Management Event signal (PME#) wake-up support ⎯ PCI Express WAKE# signal support ⎯ Wake from serial port 33
  • Intel DQ57TM | Product Specification - Page 34
    Intel Desktop Board DQ57TM Technical Product Specification 1.16.1 ACPI ACPI gives the operating system direct control over the power management and Plug and Play functions of a computer. The use of ACPI with this board requires an operating system that provides full ACPI support. ACPI features
  • Intel DQ57TM | Product Specification - Page 35
    or external source. No power to the system. Service can be performed safely. Notes: 1. Total system power is dependent on the system configuration, including add-in boards and peripherals powered by the system chassis' power supply. 2. Dependent on the standby power consumption of wake-up
  • Intel DQ57TM | Product Specification - Page 36
    events that can wake the computer from specific states. Table 8. Wake-up Devices and Events These devices/events can wake up the computer... Power switch RTC alarm LAN USB PME# signal WAKE# signal Serial port Notes: • S4 implies operating system support only. • USB ports are turned off during S4/S5
  • Intel DQ57TM | Product Specification - Page 37
    board provides several power management hardware features, including: • Power connector • Fan headers • LAN wake capabilities • Instantly Available PC technology • Wake from USB • PME# signal wake-up support • WAKE# signal wake-up support • Wake from serial port • +5 V Standby Power Indicator LED
  • Intel DQ57TM | Product Specification - Page 38
    Intel Desktop Board DQ57TM Technical Product Specification 1.16.2.2 Fan Headers The function/operation of the fan headers is as follows: • The fans are on when the board is in the S0 or S1 state • The fans are off when the board is in the S3, S4, or S5 state • Each fan header is wired to a fan
  • Intel DQ57TM | Product Specification - Page 39
    board to enter the ACPI S3 (Suspend-toRAM) sleep-state. While in the S3 sleep-state, the computer will appear to be off (the power supply is off and the front panel power LED will behave as configured by the BIOS "S3 State Indicator" option). When signaled by a wake-up device or event, the system
  • Intel DQ57TM | Product Specification - Page 40
    Intel Desktop Board DQ57TM Technical Product Specification CAUTION If AC power has been switched off and the standby power indicators are still lit, disconnect the power cord before installing or removing any devices connected to the board. Failure to do so could damage the board and any attached
  • Intel DQ57TM | Product Specification - Page 41
    with these two governmental agencies in the definition of new requirements. Intel Desktop Board DQ57TM meets the following program requirements in an adequate system configuration, including appropriate selection of an efficient power supply: • Energy Star v5.0, category A • EPEAT* • Korea e-Standby
  • Intel DQ57TM | Product Specification - Page 42
    Intel Desktop Board DQ57TM Technical Product Specification 42
  • Intel DQ57TM | Product Specification - Page 43
    the address space that is allocated for PCI Conventional bus add-in cards, PCI Express configuration space, BIOS (SPI Flash device), and chipset overhead resides above the top of DRAM (total system memory). On a system that has 16 GB of system memory installed, it is not possible to use all
  • Intel DQ57TM | Product Specification - Page 44
    Intel Desktop Board DQ57TM Technical Product Specification Figure 9. Detailed System Memory Address Map 44
  • Intel DQ57TM | Product Specification - Page 45
    bus). Dependent on video adapter used. Video memory and BIOS Extended BIOS data (movable by memory manager software) Extended conventional memory Conventional memory 2.2 Connectors and Headers CAUTION Only the following connectors and headers have overcurrent protection: back panel and front panel
  • Intel DQ57TM | Product Specification - Page 46
    Intel Desktop Board DQ57TM Technical Product Specification 2.2.1 Back Panel Connectors Figure 10 shows the location of the back panel connectors for the board. Item A B C D E F G H I J K Description LAN USB ports DVI-I connector DVI-D connector DisplayPort connector USB ports eSATA port USB ports
  • Intel DQ57TM | Product Specification - Page 47
    Technical Reference 2.2.2 Component-side Connectors and Headers Figure 11 shows the locations of the component-side connectors and headers. Figure 11. Component-side Connectors and Headers Table 10 lists the component-side connectors and headers identified in Figure 11. 47
  • Intel DQ57TM | Product Specification - Page 48
    fan header Processor fan header Front chassis fan header Chassis intrusion header Main power connector (2 x 12) SATA connectors Alternate front panel LED header Front panel header Front panel USB headers (4) Intel Remote PC Assist header P Serial port header Q S/PDIF header R Front panel audio
  • Intel DQ57TM | Product Specification - Page 49
    Ready) DSR (Data Set Ready) CTS (Clear To Send) Key (no pin) Table 12. S/PDIF Header Pin Signal Name 1 Ground 2 S/PDIF out 3 Key (no pin) 3 +5V_DC Table 13. Internal Mono Speaker Header Pin Signal Name 1 − 2 + Table 14. Front Panel Audio Header for Intel HD Audio Pin Signal Name
  • Intel DQ57TM | Product Specification - Page 50
    Intel Desktop Board DQ57TM Technical Product Specification Table 15. Front Panel Audio Header for AC '97 Audio Pin Signal Name Pin Signal Name 1 MIC 2 AUD_GND 3 MIC_BIAS 4 AUD_GND 5 FP_OUT_R 6 FP_RETURN_R 7 AUD_5V 8 KEY (no pin) 9 FP_OUT_L 10 FP_RETURN_L NOTE Not all AC '97
  • Intel DQ57TM | Product Specification - Page 51
    Processor (4-Pin) Fan Header Pin Signal Name 1 Ground 2 +12 V 3 FAN_TACH 4 FAN_CONTROL Table 20. Front and Rear Chassis Fan Headers Pin 4-Wire Support Pin 3-Wire Support 1 Ground 3 Ground 2 +12 V 2 FAN_POWER 3 FAN_TACH 1 FAN_TACH 4 FAN_CONTROL N/A N/A Table 21. Intel
  • Intel DQ57TM | Product Specification - Page 52
    Intel Desktop Board DQ57TM Technical Product Specification 2.2.2.3 Power Supply Connectors The board has the following power supply connectors: • Main power - a 2 x 12 connector. This connector is compatible with 2 x 10 connectors previously used on Intel Desktop boards. The board supports the use
  • Intel DQ57TM | Product Specification - Page 53
    Switch 6 PWR# 8 Ground Not Connected 10 N/C In/ Out Description Out Front panel green LED Out Front panel yellow LED In Power switch Ground Not connected Figure 12. Connection Diagram for Front Panel Header 2.2.2.4.1 Hard Drive Activity LED Header Pins 1 and 3 can be connected
  • Intel DQ57TM | Product Specification - Page 54
    Intel Desktop Board DQ57TM Technical Product Specification 2.2.2.4.2 Reset Switch Header Pins 5 and 7 can be connected to a momentary single pole, single throw (SPST) type switch that is normally open. When the switch is closed, the board resets and runs the POST. 2.2.2.4.3 Power LED Header
  • Intel DQ57TM | Product Specification - Page 55
    Front Panel USB Headers Figure 13 is a connection diagram for the front panel USB headers. NOTE • The +5 V DC power on the USB headers is fused. • Use only a front panel USB connector that conforms to the USB 2.0 specification for high-speed USB devices. Figure 13. Connection Diagram for Front Panel
  • Intel DQ57TM | Product Specification - Page 56
    Intel Desktop Board DQ57TM Technical Product Specification 2.3 BIOS Configuration Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 14
  • Intel DQ57TM | Product Specification - Page 57
    Technical Reference Table 27. BIOS Setup Configuration Jumper Settings Function/Mode Normal Jumper Setting 1-2 Configuration The BIOS uses current configuration information and passwords for booting. Configure 2-3 Recovery None After the POST runs, Setup runs automatically. The maintenance
  • Intel DQ57TM | Product Specification - Page 58
    Intel Desktop Board DQ57TM Technical Product Specification 2.4 Clear CMOS Header Figure 15 shows the location of the Clear CMOS header. In order to CMOS clear when the board is powered on (S0 mode) or in standby (S1 or S3 mode) may damage the board. Figure 15. CMOS Clear Header Table 28. Clear
  • Intel DQ57TM | Product Specification - Page 59
    form factor for the board. Dimensions are given in inches [millimeters]. The outer dimensions are 9.60 inches by 9.60 inches [243.84 millimeters by 243.84 millimeters]. Location of the I/O connectors and mounting holes are in compliance with the ATX specification. Figure 16. Board Dimensions 59
  • Intel DQ57TM | Product Specification - Page 60
    example, for a system consisting of a supported 95 W processor (see Section 1.4 on page 14 for information on supported processors), 2 GB DDR3 RAM, one high end video card, one hard disk drive, one optical drive, and all board peripherals enabled, the minimum recommended power supply is 460 W. Table
  • Intel DQ57TM | Product Specification - Page 61
    fan 2.0 A 1.5 A 1.5 A 2.6.3 Add-in Board Considerations The board is designed to provide 2 A (average) of current for each add-in board from the +5 V rail. The total +5 V current draw for add-in boards for a fully loaded board (all expansion slots filled) must not exceed the system's power supply
  • Intel DQ57TM | Product Specification - Page 62
    Intel Desktop Board DQ57TM Technical Product Specification 2.7 Thermal Considerations CAUTION A chassis with a maximum internal ambient temperature of 38 oC at the processor fan inlet is required. Use of a processor heat sink that provides omni-directional airflow to maintain required airflow across
  • Intel DQ57TM | Product Specification - Page 63
    when considering proper airflow to cool the board. Table 31. Thermal Considerations for Components Component Maximum Case Temperature Processor For processor case temperature, see processor datasheets and processor specification updates Intel Q57 Express Chipset 111 oC (under bias) For
  • Intel DQ57TM | Product Specification - Page 64
    Intel Desktop Board DQ57TM Technical Product Specification 2.8 Reliability The Mean Time Between specifications for the board. Table 32. Environmental Specifications Parameter Temperature Non-Operating Operating Shock Unpackaged Packaged Vibration Unpackaged Packaged Specification
  • Intel DQ57TM | Product Specification - Page 65
    board uses an Intel BIOS that is stored in a 64 Mbit (8,192 KB) Serial Peripheral Interface Flash Memory (SPI Flash) device which can be updated using a set of utilities. The SPI Flash contains the BIOS Setup program, POST, LAN EEPROM information, Plug and Play support, and other firmware. The BIOS
  • Intel DQ57TM | Product Specification - Page 66
    Intel Desktop Board DQ57TM Technical Product Specification Table 33 lists the BIOS Setup program menu features. Table 33. BIOS Setup Program Menu Bar Maintenance Main Configura- tion Performance Security Clears passwords and displays processor information Displays processor and memory
  • Intel DQ57TM | Product Specification - Page 67
    when the operating system's USB drivers are not yet available. Legacy USB support is used to access the BIOS Setup program, and to install an operating system that supports USB. By default, Legacy USB support is set to Enabled. Legacy USB support operates as follows: 1. When you apply power to the
  • Intel DQ57TM | Product Specification - Page 68
    the updated BIOS matches the target system to prevent accidentally installing an incompatible BIOS. NOTE Review the instructions distributed with the upgrade utility before attempting a BIOS update. For information about BIOS update utilities Refer to http://www.intel.com/support/motherboards
  • Intel DQ57TM | Product Specification - Page 69
    /motherbd/software/itk/ http://developer.intel.com/products/motherboard/DQ57TM/ tools.htm and http://developer.intel.com/design/motherbd/software.htm 3.5 BIOS Recovery It is unlikely that anything will interrupt a BIOS update; however, if an interruption occurs, the BIOS could be damaged. Table 35
  • Intel DQ57TM | Product Specification - Page 70
    Intel Desktop Board DQ57TM Technical Product Specification 3.6 Boot Options In the BIOS Setup program, the user can choose to boot from a hard drive, optical drive, removable drive, or the network. The default setting is for the optical drive to be the first boot device, the hard drive second,
  • Intel DQ57TM | Product Specification - Page 71
    will halt with the message: Hard Disk Drive Password Entry Error A manual power cycle will be required to resume system operation. NOTE As implemented on DQ57TM, Hard Disk Drive Password Security is only supported on SATA port 0. The passwords are stored on the hard disk drive so if the drive
  • Intel DQ57TM | Product Specification - Page 72
    Intel Desktop Board DQ57TM Technical Product Specification NOTE Hard Disk Drive Password Security is not supported in PCH RAID mode. Secured hard disk drives attached to the system when the system is in PCH RAID mode will not be accessible due to the disabling of BIOS Hard Disk Drive Password
  • Intel DQ57TM | Product Specification - Page 73
    Overview of BIOS Features Table 38 shows the effects of setting the supervisor password and user password. This table is for reference only and is not displayed on the screen. Table 38. Supervisor and User Password Functions Password Set Supervisor Mode User Mode Setup Options Neither Can
  • Intel DQ57TM | Product Specification - Page 74
    Intel Desktop Board DQ57TM Technical Product Specification 74
  • Intel DQ57TM | Product Specification - Page 75
    an error message describing the problem (see Table 39). Table 39. BIOS Beep Codes Type Pattern F2 Setup/F10 Boot Menu One 0.5 second beep when BIOS is ready to Prompt accept keyboard input BIOS update in progress None Video error (no add-in graphics card installed) On-off (1.0 second each
  • Intel DQ57TM | Product Specification - Page 76
    Intel Desktop Board DQ57TM Technical Product Specification 4.3 Front-panel Power LED Blink Codes Whenever a recoverable error occurs during POST, the BIOS causes the board's front panel power LED to blink an error message describing the problem (see Table 40). Table 40. Front-panel Power LED
  • Intel DQ57TM | Product Specification - Page 77
    in hexadecimal. Table 42. Port 80h POST Code Ranges Range Category/Subsystem 00 - 0F Debug codes: Can be used by any PEIM/driver for debug. 10 - 1F Host Processors: 1F is an unrecoverable CPU error. 20 - 2F Memory/Chipset: 2F is no memory detected or no useful memory detected. 30 - 3F
  • Intel DQ57TM | Product Specification - Page 78
    Intel Desktop Board DQ57TM Technical Product Specification Table 43. Port 80h POST Codes POST Code Description of POST Operation Host Processor 10 Power-on initialization of the host processor (Boot Strap Processor) 11 Host processor cache initialization (including APs) 12 Starting
  • Intel DQ57TM | Product Specification - Page 79
    Messages and Beep Codes Table 43. Port 80h POST Codes (continued) POST Code Description of POST Operation Keyboard (USB) 90 Resetting keyboard 91 Disabling keyboard 92 Detecting presence of keyboard 93 Enabling the keyboard 94 Clearing keyboard input buffer 95 Instructing keyboard
  • Intel DQ57TM | Product Specification - Page 80
    Intel Desktop Board DQ57TM Technical Product Specification Table 43. Port 80h POST Codes (continued) POST Code Description of POST Operation DXE Drivers E7 Waiting for user input E8 Checking password E9 Entering BIOS setup EB Calling Legacy Option ROMs Runtime Phase/EFI OS Boot F4
  • Intel DQ57TM | Product Specification - Page 81
    Error Messages and Beep Codes Table 44. Typical Port 80h POST Sequence POST Code Description 21 Initializing a chipset component 22 Reading SPD from memory DIMMs 23 Detecting presence of memory DIMMs 25 Configuring memory 28 Testing memory 34 Loading recovery capsule E4 Entered DXE
  • Intel DQ57TM | Product Specification - Page 82
    Intel Desktop Board DQ57TM Technical Product Specification 82
  • Intel DQ57TM | Product Specification - Page 83
    • Electromagnetic Compatibility (EMC) standards • Product certification markings 5.1.1 Safety Standards Intel Desktop Board DQ57TM complies with the safety standards stated in Table 45 when correctly installed in a compatible host system. Table 45. Safety Standards Standard Title CSA/UL 60950
  • Intel DQ57TM | Product Specification - Page 84
    Intel Desktop Board DQ57TM Technical Product Specification 5.1.2 European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the product Intel® Desktop Board DQ57TM is in conformity with all applicable essential requirements necessary for
  • Intel DQ57TM | Product Specification - Page 85
    of this program, including the scope of covered products, available locations, shipping instructions, terms and conditions, etc Intel Product Recycling Program http://www.intel.com/intel/other/ehs/product_ecology Deutsch Als Teil von Intels Engagement für den Umweltschutz hat das Unternehmen das
  • Intel DQ57TM | Product Specification - Page 86
    Intel Desktop Board DQ57TM Technical Product Specification Español Como parte de su compromiso de responsabilidad medioambiental, Intel ha implantado el programa de reciclaje de productos Intel, que permite que los consumidores al detalle de los productos Intel devuelvan los productos usados en los
  • Intel DQ57TM | Product Specification - Page 87
    kayıtlar ve şartlar v.s dahil bütün ayrıntılarını ögrenmek için lütfen http://www.intel.com/intel/other/ehs/product_ecology Web sayfasına gidin. 5.1.3.3 Lead Free Desktop Board This Intel Desktop Board is a European Union Restriction of Hazardous Substances (EU RoHS Directive 2002/95/EC) compliant
  • Intel DQ57TM | Product Specification - Page 88
    Intel Desktop Board DQ57TM Technical Product Specification Table 46. Lead-Free Board Markings Description Lead-Free 2nd Level Interconnect: This symbol is used to identify electrical and electronic assemblies and components in which the lead (Pb) concentration level in the desktop board substrate
  • Intel DQ57TM | Product Specification - Page 89
    Intel Desktop Board DQ57TM complies with the EMC regulations stated in Table 47 when correctly installed in a compatible host system -24 CNS 13438:2006 Title 47 of the Code of Federal Regulations, Part15, Subpart B, Radio Install and use the equipment according to the instruction manual. 89
  • Intel DQ57TM | Product Specification - Page 90
    Intel Desktop Board DQ57TM Technical Product Specification Korean Class B statement Intel supplier code number, N-232. Japan VCCI (Voluntary Control Council for Interference) mark. S. Korea KCC (Korean Communications Commission) mark. Includes adjacent KCC certification number: CPU-DQ57TM
  • Intel DQ57TM | Product Specification - Page 91
    Regulatory Compliance and Battery Disposal Information 5.2 Battery Disposal Information CAUTION Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations.
  • Intel DQ57TM | Product Specification - Page 92
    Intel Desktop Board DQ57TM Technical Product Specification PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas por
  • Intel DQ57TM | Product Specification - Page 93
    Regulatory Compliance and Battery Disposal Information AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan. OSTRZEŻENIE Istnieje niebezpieczeństwo
  • Intel DQ57TM | Product Specification - Page 94
    Intel Desktop Board DQ57TM Technical Product Specification 94
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
Intel® Desktop Board
DQ57TM
Technical Product Specification
January 2010
Order Number:
E8
3547
-001US
The Intel
®
Desktop Board DQ57TM may contain design defects or errors known as errata that may cause the product to deviate from published
specifications.
Current characterized errata are documented in the Intel Desktop Board DQ57TM Specification Update.