Intel DQ57TM Intel Desktop Board DQ57TM Product Guide English - Page 75
Recovering the BIOS, Advanced > Boot Configuration, Display F7 to Update BIOS
View all Intel DQ57TM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Updating the BIOS Additionally, the F7 prompt display can be enabled during start-up by following these steps: 1. Power the computer on. 2. Enter the BIOS Setup by pressing F2 during boot. 3. Go to the Advanced > Boot Configuration menu. 4. Enable Display F7 to Update BIOS. 5. Press F10 to save and exit. Recovering the BIOS It is unlikely that anything will interrupt the BIOS update; however, if an interruption occurs, the BIOS could be damaged. Due to BIOS size and recovery requirements, a CD-R with the .BIO file in the root directory will be required. For more information about updating the Intel Desktop Board BIOS or recovering from a BIOS update failure, go to http://support.intel.com/support/motherboards/desktop/sb/CS-022312.htm 75
Updating the BIOS
75
Additionally, the F7 prompt display can be enabled during start-up by following
these steps:
1.
Power the computer on.
2.
Enter the BIOS Setup by pressing F2 during boot.
3.
Go to the
Advanced > Boot Configuration
menu.
4.
Enable
Display F7 to Update BIOS
.
5.
Press F10 to save and exit.
Recovering the BIOS
It is unlikely that anything will interrupt the BIOS update; however, if an interruption
occurs, the BIOS could be damaged.
Due to BIOS size and recovery requirements, a
CD-R with the .BIO file in the root directory will be required.
For more information about updating the Intel Desktop Board BIOS or recovering from
a BIOS update failure, go to