Intel S2600IP Software User Guide for Windows* - Page 33
Reset Disks to Non-RAID, Up>, Down>, Space, Enter>, Select Target Disk
View all Intel S2600IP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
RAID OpROM Utility Figure 17. Reset Disks to Non-RAID 2. Use and arrow keys to select the target disk, and press key to mark the disk with a green mark on left side of its Port number. Press key to reset this disk. A question will pop up at lower side of the screen. Figure 18. Select Target Disk to Reset 3. When confirmed, press to go on resetting this disk to Non-RAID mode. After this, if system detects both a "Degrade" volume and disk available for rebuilding, a Degraded Volume Detected window will pop up, asking for selecting a disk to initiate a rebuild. 24 Intel® RSTe User's Guide
RAID OpROM Utility
24
Intel
®
RSTe User
’
s Guide
Figure 17. Reset Disks to Non-RAID
2.
Use <
Up>
and <
Down>
arrow keys to select the target disk, and press <
Space
> key to mark the disk
with a green mark on left side of its Port number. Press <
Enter>
key to reset this disk. A question will
pop up at lower side of the screen.
Figure 18. Select Target Disk to Reset
3.
When confirmed, press <
Y>
to go on resetting this disk to Non-RAID mode. After this, if system
detects both a “
Degrade
” volume and disk available for rebuilding, a Degraded Volume Detected
window will pop up, asking for selecting a disk to initiate a rebuild.