Intel S5000PSLROMBR Hardware Guide - Page 9
Pass/Fail Test Criteria - specifications
UPC - 735858198271
View all Intel S5000PSLROMBR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Intel® Server Boards S5000PSL/S5000XSL, Intel® Workstation Board S5000XVN, and Intel® Server System SC5400RA Introduction 1.2 Pass/Fail Test Criteria For each operating system, adapter, and peripheral configuration, a test passes if specific criteria are met. Specific configurations may have had particular characteristics that were addressed on a case-by-case basis. In general, a configuration passes testing if the following conditions are met: The operating system installed without error. - Manufacturer's installation instructions or Intel's best-known methods were used for the operating system installation. - No extraordinary workarounds were required during the operating system installation. - The server system behaved as expected during and after the operating system installation. - Application software installed and executed normally. Hardware compatibility tests ran to completion without error. Test software suites executed successfully - Test and data files were created in the correct directories without error. - Files copied from client to server and back compare to the original with zero errors reported. - Clients remain connected to the server system. - Industry standard test suites run to completion with zero errors reported. The testing of the Intel® Server Boards S5000PSL/S5000XSL and Intel® Workstation Board S5000XVN was performed with either Intel® Server Chassis SC5400 or Intel® Entry Server Chassis SC5299-E. Revision 2.9 3