Intel S5400SF Product Guide - Page 55
Setting the BIOS Configuration Jumper,
UPC - 735858196413
View all Intel S5400SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Installing and Replacing Desktop Board Components 1. Observe the precautions in "Before You Begin" on page 29. 2. Connect the 12 V processor core voltage power supply cables to the 2 x 4 pin connectors. Make sure to connect one supply cable for each installed processor. 3. If necessary, connect the 1 x 4 power supply cable to the 1 x 4 connector. 4. Connect the main power supply cable to the 2 x 12 pin connector. Setting the BIOS Configuration Jumper NOTE Always turn off the power and unplug the power cord from the computer before moving the jumper. Moving the jumper with the power on may result in unreliable computer operation. Figure 27 shows the location of the Desktop Board's BIOS configuration jumper block. Figure 27. Location of the BIOS Configuration Jumper Block 55