Intel S5520HCR Configuration Guide - Page 7
and/or SATA Software RAID 5 on S5520HC, S5500HCV, and S5520SC boards.
View all Intel S5520HCR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
The server system is designed to work with Intel® Xeon® processor 5500 series with 95W maximum power or with Intel® Xeon® processor 5600 series with 130W maximum power, and is compatible with boxed STS100C (Combo) or STS100A (Active) heat sink. 10) The Intel® Workstation System SC5650SCWS includes: Intel® Workstation Board S5520SC pre-installed in the Intel® Sever Chassis SC5650WS Support for six tool-free non hot-swap hard drives. Upgradeable to hot swap SAS/SATA 6-drive bay. Non-redundant 1000W high efficiency PFC power supply Three non-redundant fixed cooling fan with ducting Quick Start User's Guide and Configuration Label Cables (one each) o Front Panel Cable (baseboard header to front panel, pre-routed)) o USB Cable (USB header to chassis front panel, pre-routed) o Adapter Cable providing two additional SATA power connectors (in cable kit) o AC power cord is only included in SC5650SCWSNA Chassis intrusion switch assembly (pre-routed) The workstation system is designed to work with Intel® Xeon® processor 5500 series & 5600 series with 130W maximum power, and is compatible with boxed STS100C (Combo) or STS100A (Active) heat sink. 11) Common accessories include: Hot Swap Drive Bays: - AXX6DRV3GEXP: Expander-based 6-drive bay that supports SAS/SATA drives. Requires two free SAS ports from the SAS module or SAS RAID card. - AXX4DRV3GEXP: Expander-based 4-drive bay that supports SAS/SATA drives. Requires two free SAS ports from the SAS module or SAS RAID card. Only supported in Intel® Server Chassis SC5600BRP, and SC5600LX. - AXX6DRV3GR: 6-drive bay that supports SAS/SATA drives. Requires six free SAS or SATA ports. SAS hard drive support requires SAS connectors from a SAS module or SAS RAID Card. Support 6Gb SAS Hard Drives with compatible 6Gb SAS adapters - AXX4DRV3GR: 4-drive bay that supports SAS/SATA drives. Requires four free SAS or SATA ports. SAS hard drive support requires SAS connectors from a SAS module or SAS RAID Card. Only supported in Intel® Server Chassis SC5600BRP and SC5600LX. Support 6Gb SAS Hard Drives with compatible 6Gb SAS adapters. AXX750WPS: Spare 750W power supply module for Intel® Server Chassis SC5600LX and SC5600BRP ARIGRACK: Rack conversion kit (SC5600BASE, SC5600BRP and SC5600LX) APP3RACKIT: Rack conversion kit (SC5600 chassis family). AXXRAKSW5: Intel® RAID Activation Key AXXRAKSW5 to enable Intel Embedded RAID technology II for SAS and/or SATA Software RAID 5 on S5520HC, S5500HCV, and S5520SC boards. APPT600WHPSU: Additional 600W power supply module- required for full redundancy for SC5650BRP only. APPTHSDBKIT: Cooling and mounting kit required for 6-drive hot-swap backplanes installed in the SC5650 chassis family. This kit should be used with AXX6DRV3GR APP3HSDBKIT: Cooling and mounting kit required for 6-drive hot-swap backplanes installed in the SC5650 chassis family. This kit should be used with AXX6DRV3GEXP. AXX25DRVADPTR: 2.5" hard drive carrier kit for installing 2.5" SATA or SAS hard drive or Solid State Drive into 3.5" hot swap drive bay 7