Intel SE440BX Product Guide - Page 40

Using the Setup Program Table 7. Peripheral Configuration Submenu (continued) Feature Mode Base I/O address Interrupt Audio Legacy USB Support Options • Output Only • Bi-directional (default) • EPP • ECP • 378 • 278 • 228 • IRQ 5 • IRQ 7 • Disabled • Enabled (default) • Disabled (default) • Enabled Description Selects the mode for the parallel port. Output Only operates in AT†-compatible mode. Bi-directional operates in bi-directional PS/2-compatible mode. EPP is Extended Parallel Port mode, a high-speed bidirectional mode. ECP is Enhanced Capabilities Port mode, a high-speed bi-directional mode. Specifies the base I/O address for the parallel port. Specifies the interrupt for the parallel port. Enables or disables the onboard audio subsystem. Enables or disables USB legacy support. IDE Configuration Table 8. IDE Configuration Feature IDE Controller Hard Disk Pre-Delay Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Options • Disabled • Primary • Secondary • Both (default) • Disabled (default) • 3 Seconds • 6 Seconds • 9 Seconds • 12 Seconds • 15 Seconds • 21 Seconds • 30 Seconds No options No options No options No options Description Specifies the integrated IDE controller. Primary enables only the Primary IDE Controller. Secondary enables only the Secondary IDE Controller. Both enables both IDE controllers. Specifies the hard disk drive pre-delay. Reports type of connected IDE device. When selected, displays the Primary IDE Master submenu. Reports type of connected IDE device. When selected, displays the Primary IDE Slave submenu. Reports type of connected IDE device. When selected, displays the Secondary IDE Master submenu. Reports type of connected IDE device. When selected, displays the Secondary IDE Slave submenu. 40