Intermec CK3X Intermec RFID Demo User Guide - Page 33
Protect a Tag, About the Write, Error Messages on Define a Data Field to Read
View all Intermec CK3X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Chapter 2 - Write a Tag 7 View the results of the write. • If the write is successful, a table displays the EPC value of the tag and a "WROK" (Write OK) message. • If the write is unsuccessful, a table displays the EPC value of the tag with an error. For a list of errors, see "About the Write Error Messages" on page 36. 8 (Optional) To verify that the kill password was written successfully: a Set the application to read the kill password. For help, see "Define a Data Field to Read" on page 8. b Read the tag. For help, see "Read a Single Tag" on page 11. c View the tag details field. For help, see "View Tag Field Details" on page 12. Protect a Tag You can use the Intermec RFID Demo to protect an EPC value, user memory, access password, or kill password you have written to a tag. You must first program and protect the access password in order to perform this procedure. To protect a tag 1 If you already launched the Intermec RFID Demo, continue with Step 2. If not, from the Start or Home screen, tap Intermec RFID Demo. 2 Tap Menu > Write. The Write Mode tab appears. 3 From the Program drop-down menu, select one of the following: • EPC • User memory • Access password • Kill password 4 From the drop-down menu, select Protect. 5 In the Data field, enter the access password you recently programmed. The password must be 4 bytes. Intermec RFID Demo User Guide 27