Intermec PB31 Printer Handstrap Instructions - Page 1

Printer Handstrap Instructions The handstrap (P/N 074789) provides a convenient way to carry your PB21, PB22, PB31, PB32, PB42, PB50, or PB51 printer. With the handstrap attached, you can also attach the shoulder strap (P/N 074788). The handstrap kit contains these items: • Handstrap accessory • This instruction sheet To attach the handstrap to the printer 1 Remove both ends of the handstrap from the strap adjusters that secure them to the strap. 2 Insert one end of the handstrap through the handstrap clip on the printer. Make sure the D-rings on the handstrap are facing away from the printer. 3 Pull the end of the handstrap through the handstrap clip and then insert the end of the handstrap back through the strap adjuster and pull tight. Handstrap clip Strap adjuster D-ring 4 Repeat step 3 with the other end of the handstrap. You are now ready to use the printer with the handstrap, or you can attach the shoulder strap to the D-rings on the handstrap.