Intermec PB32 PB2X and PB3X Protective Case Instructions - Page 2

To insert the printer into the protective case 1 Unzip the main flap on the protective case and insert the printer with the control panel facing upward. Card reader flap Media flap Communications flap 2 Close the zippers on the protective case and secure the flap over the printer. You can: • open the media flap to print labels while the printer is in the case. • open the card reader flap to use the card reader. • open the communications flap to attach a power cable, USB cable, or a serial cable to the printer. Worldwide Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com © 2010 Intermec Technologies Corporation. All rights reserved. PB2X and PB3X Protective Case Instructions *943-223-002* P/N 943-223-002