Invacare 3GTQ3 Owners Manual 3 - Page 75
Removing/Installing/Adjusting Headrest, Removing, Installing, Adjusting Headrest Height
View all Invacare 3GTQ3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
7.12 Removing/Installing/Adjusting Headrest 7 SETUP/MAINTENANCE ƽ CAUTION If using a ventilator, verify headrest support does not interfere at all angles. Otherwise, injury or damage may occur. Removing 1. Loosen, but DO NOT remove, the thumb screw that secures the headrest to the headrest mounting bracket. 2. Remove the headrest from the headrest mounting bracket. Installing 1. Make sure thumb screw is loose. 2. Install the headrest until the headrest stop sits on the headrest mounting bracket. 3. If necessary, adjust the height, depth or direction of the headrest. Refer to Adjusting Headrest Height on page 75 or Adjusting Headrest Depth/Direction on page 76. Adjusting Headrest Height 1. Loosen the set screw on the headrest stop. 2. Loosen, but DO NOT remove, the thumb screw that secures the headrest to the headrest mounting bracket. 3. Position the headrest to the desired height. 4. Tighten the thumb screw that secures the headrest to the headrest mounting bracket. 5. Tighten the set screw on the headrest stop. 6. If necessary, adjust the depth or direction of the headrest. Refer to Adjusting Headrest Depth/Direction on page 76. Slide Tube Offset Fixture Depth Adjustment Socket Screws Height Adjustment Set Screw Thumb Screw Headrest Mounting Bracket Headrest Stop FIGURE 10 Removing/Installing/Adjusting Headrest Part No 1143192 75 Invacare® Adjustable ASBA Seats