Invacare 3GTQ3V Owners Manual - Page 112
CMPJ+ Joysticks
View all Invacare 3GTQ3V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
8 SETUP/MAINTENANCE CMPJ+ Joysticks For this procedure, refer to FIGURE 17. Disconnecting 1. Pull the latch away from the joystick connector. 2. Disconnect the joystick connector from the remaining connectors Connecting Ensure the gaskets are installed in the top connector cap and between network connectors. 1. Ensure the latch is pulled away from the network connector. 2. Connect the network connector to the other connectors. 3. Top and Bottom Connectors - Install connector caps onto the network connector. 4. Push the latch in to secure the network connectors and caps. 5. If necessary secure excess cable using tie-wraps. Top Connector Cap Network Connectors Latch Gasket Controller Cable Gasket Bottom Connector Cap Gasket FIGURE 17 Disconnecting/Connecting the Joysticks - CMPJ+ Joysticks Invacare 3G Storm Series® 112 Part No 1143151