Invacare 5301IVC Owners Manual - Page 22
Assembling the Spring Fabric, Adjusting and Reconnecting the Head, Pull Tube
View all Invacare 5301IVC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Invacare® Homecare Beds 4.5 Assembling the Spring Fabric 4.6 Adjusting and Reconnecting the Head Section Pull Tube 1. Lift the head spring C away from the bed frame to give slack to the fabric. 2. Connect the spring fabric A together with the links B provided. 1. To disconnect the head pull tube assembly A from the side frame of the foot spring, remove the hitch pin E and grommet/washer F from the clevis pin G. 2. Extend the inner pull tube shaft C manually until the spring button "clicks" into the adjustment hole of the outer pull tube D. 3. Connect the pull tube end assembly A to the lift arm of the head spring as follows: a. Insert the clevis pin G into the lift arm slot H. b. Replace the grommet/washer F. c. Secure with hitch pin E. 22 1114836-H-05