Invacare 5890IVC Owners Manual - Page 29
Installing/Removing Cable Lock, Installing, Removing, Installing the Manual Crank for Hi/Lo Function
View all Invacare 5890IVC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
4.11.1 Installing/Removing Cable Lock The following should be performed by a qualified technician only. Set-up 4.11.2 Installing the Manual Crank for Hi/Lo Function Installing 1. With the cables seated to the proper connector on control box, slide the cables E into the appropriate cable lock slots A. 2. Depress the cable lock clips B. 3. Push the cable lock clips into the locking slots C on the junction box D, until they click in place. Removing 1. Compress the cable lock clips B firmly. 2. Carefully pull the cable lock F away from the junction box D. 3. Slide the cable lock F off of the cables E. 1. Pinch the ears A on the input drive shaft cover B to open the cover. 2. Flip the input drive shaft cover up and push until it attaches to the gear box C. The cross pins D will now be accessible. 3. Connect the manual crank E to the cross pins until the spring F engages the cross pins. 4. Unfold the handle G on the hand crank. 1114836-H-05 29