Invacare 9153637773 Owners Manual - Page 42
Seat And Back, Seat Width, Pivot Link
View all Invacare 9153637773 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
7 SEAT AND BACK 7.3 Adjusting the Seat Width Swingaway Front Riggings For this procedure, refer to FIGURE 3, FIGURE 4 on page 43, and FIGURE 5 on page 44. When adjusting the seat width of the wheelchair, the back and seat upholstery MUST be changed. If applicable, the headrest pillow and headrest upholstery MUST be changed as well. 1. Remove the existing back and seat upholstery from the wheelchair. Refer to Replacing Back Upholstery and Replacing Seat Upholstery on page 41. 2. Remove the four button screws and locknuts that secure the two pivot links to the wheelchair frame and crossbraces. 3. Remove the two button screws, locknuts and crossbrace saddle that secures the bottom of the crossbrace to the wheelchair frame. Repeat for other crossbrace. 4. Remove the hex screw, coved washers, washers and locknut that secure the two crossbraces together. See Detail "B". Note the orientation of the coved washers, washers and locknut for assembling the new crossbraces. See Detail "B". 5. Assemble the two new crossbraces together with the existing hex screw, coved washers, washers and locknut. Securely tighten. Refer to Detail "B" for hardware orientation. 6. Determine the correct pivot link and mounting hole to use with the desired seat width. SEAT WIDTH PIVOT LINK 7. Secure the pivot links to the crossbraces and wheelchair frame with the four button screws and locknuts. Securely tighten. Position crossbrace saddle on wheelchair frame using the washer on the underside of the wheelchair frame as 16 INCH I 18 INCH 16 inch 18 inch a reference. See Detail "A" for proper positioning of the crossbrace saddle. DO NOT USE 8. Reinstall the two button screws, locknuts and crossbrace saddle that secures the bottom of the new crossbrace to the wheelchair frame. Refer to Detail "B" for hardware orientation. Repeat for opposite crossbrace. Securely tighten. 9. Install the new back and seat upholstery onto the wheelchair. Refer to Replacing Back Upholstery on page 41 and Replacing Seat Upholstery on page 41. 20 INCH 22 INCH 20 inch DO NOT USE FIGURE 3 Adjusting the Seat Width - Swingaway Front Riggings Invacare® Tracer™ EX2 Wheelchair 42 Part No 1110546